Search results for query: *

  1. Fast Eddie B

    Upgraded to a 40 amp subwoofer....

    now I have to upgrade the 60 amp gennie or I won’t be able to run the car at night! I hoping this is a simple affair and someone here has done it. It is a ‘60 Fury with stock everything 318 poly. Any thoughts?
  2. Fast Eddie B

    Finding parts for converted Lean Burn

    My 77 T&C was clearly converted. All the way back to points! Even has a simple 2 pole ballast resistor vs. 4 pole. I can find plugs and wires. Those are universal. I can assume - for the $8 - that the distributor cap listed will fit because the original dizzy was presumably refitted not...
  3. Fast Eddie B

    No dash lights 60 Plymouth...

    I got the wiring diagram. Apparently no fuse. All head and tail lights work. No dash lights. Switch rotates 360 and does not engage interior lights but they work on the door switch’s. Something is off with the headligh switch or the orange wire leaving there. I have to remove the switch...
  4. Fast Eddie B

    Simple starter install question

    So i have never looked that close at installing a starter. Today i am installing a starter in my 60 Plymouth As i install it I am noticing the starter gear is engaged with the flywheel. Can’t be right. I thought the bendix moved it in and out. Does it just need to be engergized to pop back? It...
  5. Fast Eddie B

    This is likely real simple...

    I can’t remember where this resistor attaches to. It is on the positive side of the coil. Unless I put it in wrong there when I took it of. Can’t find a good pic from my dissassembly shots and the manual is Unclear. Cant find any witness marks. Everything is repainted! Thanks in advance
  6. Fast Eddie B

    How do I get at the fuses without breaking something?

    78 NYB. Manual says 'slide the fuse box toward the center of the car to remove it from the bracket' I can see a couple of relays poking out. I can grab the box, but nothing is 'sliding' anywhere! And where is the 'center of the car? To slide it on a 45 degree angle to the center of the car...
  7. Fast Eddie B

    Back to finishing my wagon after a summer hiatus to drive cars

    put all the lamps back in. Front, rear, side markers. Brake lights work. Flasher works. Running lights work. Put in the turn signals... nothing. No click, neither lights. Indicators dead too. Replaced the relay. Nothing. Assuming I got the right relay! Gotta be something simple and/or...
  8. Fast Eddie B

    having trouble getting the dash cluster out.

    An hour in and still not looking like it's coming out.... Here is the problem: no dash lights. The couple of lights that come in when the door is open work. The fuse for the lights is good. But speedo and gauges not lighting with the headlights. I figured I had to get to the back off the...
  9. Fast Eddie B

    Detecting a Lean Burn conversion

    I'm new to modern Mopars and trying to figure out what Lean Burn looks like. I have a pair of 77 wagons. One has all the electronics hanging off the air cleaner. One does not. Both have the same carb. Both have coils and vacuum advance hoses running from the carb to the distributor. Have these...
Back
Top