Search results for query: *

I have 2 wheels, looking to complete a set of them. Need 4 domes and a set of original, capped lug nuts. Will consider a set of 4. Please see the pics. PM with what you have. Thanks.

Looking to buy a 90 degree fitting, 3/8 pipe x 5/8 male flare end. Notice the rounded corner of the fitting in the pics. The new stuff is not the same!!! Also need barb end brass hose couplers, 3/8 and 5/8 sizes. PM me here. Thanks!

Looking for original ones, not repops. Need to look as good as the photo, or better. Please PM me here. Thanks.

Need some from late 1969, to Jan-Feb. of 1970. Green circled is what I am looking for. Thanks. PM please!!

On my 69 Dodge stock car, they use 3 of these to hold the torsion bar anchor to the chassis. I need to find 3 usable bolts. I think may be grade 8. Can't tell because the head of the one original I have is too rusted to tell. What I need is: 1/2 - 13 x 3.75 Black oxide, originally, or...

Looking to buy some vintage 'ROCKALLOY" brand Grade 8 bolts in the sizes listed below. They were cad. plated, when new. Need fine threads. I'd buy NOS or decent used. Let me know what you have and what you need for them. PM please - thanks!

Looking to buy one NOS 1969 dodge sticker like this. Must be original, not reproduction. Check your stash of vintage stickers. Ask your buddies! PM please. Thanks!

I need a pass side 1/4 window felt for the outside of a 68 to 70 Dodge 2 dr. B Body hardtop. Pics below are of my outside driver side part in usable condition. It shows the style I need to find. Notice there is no stainless bead running along the top! It's all black. Are there any C Body...

I'm looking for original parts from Don White's Charger. WTB - Original parts from Don White's 1969 Charger PM me here or reply to the c'list ad. Thanks. Greg

Looking to buy a D-7400 floor jack like the one pictured. I found a photo of my car on one! Note the shape of the frame. PM if you know of one, any condition ok. Thanks.

I need 3/4" wide, 3/8 thick, and at least a few rolls of NOS for a period correct restoration project. My car had a plexiglass rear window with the weatherstripping between it and the body. The photos below are what the packaging looks like. It has no size on it, so you'd need to measure the...

Looking to buy NOS or used Goodyear industrial inner tubes, size: 2.80/2.50-4. (no other size or brand needed) I need 10 total for the Lockheed recorder black box used in the trunk of the #88 Charger Daytona. Please check out the photos. They are the size of large donuts! These inner tubes...

Remember the small, white "Handling - What it is & How to get it" pamphlet by Addco? They advertised in the Hot Rod magazines. Looking for specs from the catalog for B bodies, 68 to 74. Need the various bar sizes available and their respective ratings, in pounds per inch. thanks.

I'm looking to buy 8 original (not repopped) 5/16ths - course, "H" stamped bolts for the carb to intake. Please check out your misc. parts bins and let me know! PM please. thanks... Photo below of one that I have.

Looking to buy a 1960s MoPar steering wheel, 2 spoke, part number (on it) 2660126. Black preferred but open to other colors. Thanks, in advance. PM please

I need one as nice as possible, and working, of course. This has the 3 pin, not 2, connector. Part number: 2875400 PM please. and thanks...

Just need one... MUST be OEM Chrysler, not aftermarket. Will pay good $$ for the right part. PM please. Thanks!

Looking to buy a set of 4 early 70s stock car wheels, 15 x 9.5", 5 inch bolt circle. PM please. thanks.

Need just one exactly like the photo. BIG $$ paid!! PM please!

Looking for a 426 hemi cast iron Pestolite electronic distributor with the wide base & tach drive, as seen in the photo, on the left. REWARD paid - leading to me buying one. Higher rez pic available, if needed. PM please.