'66 Fury I's latest activity
-
I'll take hideous for $1000, Alex. -
'66 Fury I reacted to Big_John's post in the thread 65 Imperial with a 413 CI that cranks but won't start with .Here's what you need to do... Download a '65 Chrysler/Imperial service manual from MyMopar That will have all the correct specs for...
-
Found it. Dye and Hampton twin engine coupe
-
Hit it with weld thru primer and do it up before.Make note of where all the voids are that aren't accessible and mist in Fluid Film to...
-
If it's old I would not put any undue pressure on it as you may create a new problem. Best bet is to flush system every two years. That...
-
I was curious about this. Radiator pressure tests (according to the '65 FSM) are done to 15PSI. At the same time, the cap is rated...
-
'66 Fury I replied to the thread Heater core leak on my new carpet.This prompts a question. What is the best way to test the integrity of a heater core? My engineering background would suggest a...
-
Uh. I put the battery on charge. Some wasps have moved in. Been working on a new acquisition. Phil
-
Ummm.... That's on a carb...
-
'66 Fury I reacted to 3175375's post in the thread Gas, EV, Hydrogen, Diesel comeback....Which way are we going? with .I agree. My point is the public is being deceived by the false cost of these vehicles. The industry and governments are hiding the real...
-
'66 Fury I reacted to 70bigblockdodge's post in the thread Gas, EV, Hydrogen, Diesel comeback....Which way are we going? with .Hmmm, let's let the market decide. As mentioned above, horses did not disappear overnight, there were electric cars in the early 20th...
-
I prefer using the Vice Grip line wrench vs a flare nut wrench set. The 7LW would be perfect for this. Use the 4LW for brake lines...
-
'66 Fury I reacted to hootothecore's post in the thread Follow up to my January post re '71 Imperial leaking oil... with .I decided to do a full teardown and rebuild even though the engine only had 45K miles on it. So, I replaced all gaskets and seals...
-
'66 Fury I replied to the thread 1966 Fury III - Unfinished Project.Hey, Philip, I'm missing your posts! I'm sure I'm not the only one. Hoping all is well with you and that FuryIII!! Lindsay
-
That’s beautiful and awesome!
