CBODY67's latest activity

  • C
    CBODY67 reacted to Scoopy G's post in the thread Sold Polara on Hemmings with
    Like
    Like
    .
    Here's a '68 Polara that sold on Hemmings auctions yesterday. I don't know how much the "buyer's fees" are, but considering the...
  • C
    CBODY67 replied to the thread Purple cam?.
    Start with a magnetic base dial indicator. The magnet in the base is directional, so it can e easily removed. Harbor Freight or...
  • C
    CBODY67 replied to the thread Which KYB shocks x4 for 1961 Newport.
    Have you looked on the KYB website for information and other models the shocks might fit? Looked in RockAuto for shocks, too? In other...
  • C
    CBODY67 replied to the thread 440 identification inquiry.
    To go along with the VIN or partial VIN stamps on the block, also look at the casting date and casting number on the side of the block...
  • C
    CBODY67 replied to the thread 440 Piston Recommendations.
    Perhaps it was a J rather than an H. I remember the HUGE exhaust manifolds that matched the "over the valve cover" ram intake system...
  • C
    CBODY67 replied to the thread Sanden conversion or RV2 Rebuild?.
    There are MANY Sanden a/c compressors other than the popular one/size. Look at the Sanden website for information on them. Even many...
  • C
    CBODY67 replied to the thread 440 Piston Recommendations.
    I looked about 440 pistons several years ago. At that time, the only thing that would be close to OEM compression were forged pistons...
  • C
    CBODY67 reacted to detmatt's post in the thread 440 Piston Recommendations with
    Agree
    Agree
    .
    Good luck on your search for pistons. I would just call my engine guy to have him source them for me so I have no suggestions but I’ll...
  • C
    CBODY67 replied to the thread Purple cam?.
    The "other" Purple Shaft cams are in the current MP catalog. A whole family of them! Tame to less-tame. Obviously co-opted from...
  • C
    CBODY67 replied to the thread Purple cam?.
    There are "Purple Shaft" cams and Purple Shaft Cams. The orig Purple Shaft cams were the "Street HEMI" 284/284 cams and a bigger one at...
  • C
    CBODY67 replied to the thread Center Console Needed.
    THAT is the one transmission I had not considered. Thanks! As the base, standard transmission in many Chryslers (which could also have...
  • C
    CBODY67 reacted to RemCharger's post in the thread Center Console Needed with
    Thanks!
    Thanks!
    .
    The block off plate was used in the 66 Chargers with a tree- on-da- tree. Didn't know there would be other lines that would have used it.
  • C
    CBODY67 replied to the thread Our 67 ragtop.
    If it was me, if the hole for that upper side molding were not filled in, I'd put a white pin stripe (as on USA Chrysler 300s) in place...
  • C
    CBODY67 reacted to RemCharger's post in the thread Our 67 ragtop with
    Like
    Like
    .
    " god awful green" are you talking about the coveted mopar turquoise? For real?
  • C
    CBODY67 reacted to 67 monaco ragtop mark's post in the thread Our 67 ragtop with
    Like
    Like
    .
    Our old girl, I have all the chrome trim… but no clips to hold any of it on Suggestions?
Show older items
Back
Top