JimmyG's latest activity
-
JJimmyG replied to the thread HD leaf springs vs stock leaf springs.Just a thought, the '64 New Yorker that is listed for parting out may have springs and a front sway bar of interest to you. You will...
-
JJimmyG replied to the thread HD leaf springs vs stock leaf springs.The torsion bar length would need careful measurement prior to doing that, as the 61 has a different mounting member and I suspect bar...
-
JJimmyG replied to the thread 440 Piston Recommendations.It occurs to me that fuel is getting less friendly towards our big blocks, and expensive in the higher octane,...so, grab a set of the...
-
JJimmyG replied to the thread HD leaf springs vs stock leaf springs.Okay, so this is quite a surprise! I have the exact same car and have been doing a considerable amount of work on it in my spare time...
-
JJimmyG replied to the thread Dash Paint Type.I have used Herb's interior paints in the past with really good outcomes that lasted well. Also if you are doing a 60 or 61 Chrysler in...
-
JJimmyG replied to the thread Interchangeably parts or the lack of.Yes, just keep an eye on the alignment spikes and screw positions (usually the same), and the pressure pattern the backing makes on the...
-
JJimmyG replied to the thread Interchangeably parts or the lack of.I have used B body armrests many times with success. I have also repaired large damaged areas with Liquid Vinyl Patch. The package says...
-
JJimmyG replied to the thread looking for replacement brake system.Mr. Mobile parts, just a thought: A collage is also defined as a "combination or collection of various things". Seems to fit, doesn't it?
-
JJimmyG replied to the thread Preference for Edlebrock or Holley?.Carbs are like color, you just have to pick the right one for YOU! Happy motoring.
-
JJimmyG replied to the thread Is a welded driveshaft typical on 73 c bodies?.I have seen this before. Unfortunately there was a period where some installers though that it was good "insurance" to lay a bead on the...
-
JJimmyG replied to the thread Preference for Edlebrock or Holley?.I have used Edelbrocks on small and big block Chrysler for eons,...probably 15 different engines and projects. I have yet to see one...
-
JJimmyG replied to the thread Lead substitute.In '98 I hauled my family and our hardtop trailer to the west coast,...over 7,000 miles in my 68 Newport 383. When I go back I was...