jmustian's latest activity

  • jmustian
    jmustian replied to the thread Electrical opinion.
    Decided to repair what I can and bought a 6 blade box to run those two burnt wires through. Leaves me 4 more post for USB and gauges.
  • jmustian
    jmustian reacted to mgm1986's post in the thread Electrical opinion with
    Like
    Like
    .
    The cooler the car the pricier the part! :lol:
  • jmustian
    jmustian replied to the thread Electrical opinion.
    I think I'll go that route. I can take one connector at a time from the bulkhead and work on that circuit. I probably won't remove the...
  • jmustian
    jmustian reacted to mgm1986's post in the thread Electrical opinion with
    Like
    Like
    .
    That is what I did. I started by carefully removing the engine wiring harness and labeling everything. Then I laid it out on a piece...
  • jmustian
    jmustian replied to the thread Electrical opinion.
    I wonder how bad it would be to update to a modern fuse box instead of fixing this mess. Most of the 69 300 parts seem to be different...
  • jmustian
    jmustian reacted to mgm1986's post in the thread Electrical opinion with
    Like
    Like
    .
    Maybe the wiring diagram would show the size of the fusible link? You can probably source another bulkhead connector on ebay if you...
  • jmustian
    jmustian replied to the thread Electrical opinion.
    Well couldn't find a fuse box connector yet. Fuse box looks good but connector on back has couple burnt ,melted connectors. Might can...
    • PXL_20251204_164453218.jpg
    • PXL_20251204_163813138.jpg
    • PXL_20251204_163730311.jpg
    • PXL_20251204_163715082.jpg
    • PXL_20251204_163506192.jpg
    • PXL_20251204_163502579.jpg
  • jmustian
    jmustian replied to the thread Electrical opinion.
    My fsm does not say what size fusible link I should have which isn't there.do you know?
  • jmustian
    jmustian replied to the thread Electrical opinion.
    Guess that's the next route. Fuse box is melted at Alt and starter, so have to replace box. Here's a pic of battery and relay where I...
    • PXL_20251204_153018254.jpg
    • PXL_20251204_153010417.jpg
  • jmustian
    jmustian replied to the thread Electrical opinion.
    Ticked again but lights quit. One feed dead. Neutral switch dead, one feed dead. Temp light switch stuck in cold, regardless of new...
  • jmustian
    jmustian replied to the thread Electrical opinion.
    I think I fixed the issue. Poor dash ground. But I ran out of gas hahaha
  • jmustian
    jmustian reacted to mgm1986's post in the thread Electrical opinion with
    Like
    Like
    .
    @1970FuryConv Makes a great point. A simple check could also be to hook a battery charger up which should bring the voltage up closer to...
  • jmustian
    jmustian reacted to 1970FuryConv's post in the thread Electrical opinion with
    Like
    Like
    .
    If you regard the fuel sending unit as resistance to ground, it is a fixed resistance to ground at a set fuel level. The only variable...
  • jmustian
    jmustian reacted to Ross Wooldridge's post in the thread Ride Height? with
    Like
    Like
    .
    Lol... another where I was checking my watch to see how long it would take you to respond! :lol: FWIW, I hate that scene... :wtf:
  • jmustian
    jmustian reacted to Big_John's post in the thread Ride Height? with
    Like
    Like
    .
    FWIW, this is a pic I took a while ago to answer a similar question. This is my '70 300. I installed new springs that were "stock'...
Back
Top