Vaanth's latest activity
-
Vaanth replied to the thread Anyone have old catalogs?.The listed OEM and AP numbers are for the 318 engine in the 1969 Fury, so the following image shows the Walker diagram and numbers for... -
-
Vaanth replied to the thread New to me 440.Nothing more on the block will tell more about the car in which installed. I meant more production information about the VIN sequence...
-
Vaanth replied to the thread New to me 440.The number would not tell you specifically which model without further information, but the Jefferson plant built Chryslers and...
-
Vaanth replied to the thread New to me 440.The information on the identification pad is as follows: J440 = 1973 440 Maltese cross = 0.001" undersize main bearing journals 2 12 =...
-
Vaanth replied to the thread New to me 440.The pictured block has a casting number of 3698830. 440swith casting number 3698830 were used in 1973 -1974 models. The casting date on...
-
-
Vaanth replied to the thread 440 Stamping.The pictured engine is a 1974 440 truck engine originally built at the Trenton Engine Plant, in Trenton Michigan, on February 3, 1974...
-
Vaanth replied to the thread Whitewalls with poverty caps - pics?.The wheels in the picture are 15" x 7" M-body wheels. 235/70-15 fits okay on a six inch wheel. The following image shows a 235/70-15 on...
-
-
Vaanth replied to the thread Whitewalls with poverty caps - pics?.The tires in that picture are size 235/75-R15.
-
Vaanth replied to the thread Temp Gauge Testing.The gauge can be bench tested with a 5 volt DC power source and select resistance values or the Miller C-3826 gauge tester. Set up a...
-
-
Vaanth replied to the thread What are you working on today??.A somewhat light day, but among some other stuff, cleaning and shining radiator caps, then coating with catalyzed clear. Eight are from...
-
-
Vaanth replied to the thread Part name for 1970 fury steering wheel attachment.The pictured broken part, is called the "horn ring retainer", Chrysler part number 2925556.
-
-
Vaanth replied to the thread Reman squareback alternator internal short?.With the new information, the alternator sounds okay.
-
Vaanth reacted to propilot74's post in the thread Reman squareback alternator internal short? with .I just rechecked, and both field terminals read 0.4 ohms to the case, and the Bat+ is showing approximately 1000 ohms to the case...
-
Vaanth replied to the thread Reman squareback alternator internal short?.With the measured numbers, that alternator is bad. It may have the shorted brush for the application use, but the rotor is definitely...
-
Vaanth replied to the thread Reman squareback alternator internal short?.With the listed measurement results, the rotor wiring is shorted to the core, and subsequently to the alternator housing. Or one, or...
