Vaanth's latest activity
-
Vaanth reacted to propilot74's post in the thread Reman squareback alternator internal short? with .I just rechecked, and both field terminals read 0.4 ohms to the case, and the Bat+ is showing approximately 1000 ohms to the case... -
Vaanth replied to the thread Reman squareback alternator internal short?.With the measured numbers, that alternator is bad. It may have the shorted brush for the application use, but the rotor is definitely...
-
Vaanth replied to the thread Reman squareback alternator internal short?.With the listed measurement results, the rotor wiring is shorted to the core, and subsequently to the alternator housing. Or one, or...
-
Vaanth replied to the thread What are you working on today??.Not "C", but getting these two B-bodies ready to start on a long term effort. It will be a lengthy, background effort because I still...
-
-
Vaanth replied to the thread Vintage Police Cars.These are not C-bodies, nor vintage pictures, but a couple of recent pictures of my two factory police cars. 1977 Fury with E68 400...
-
-
Gary , aka Vaanth , to the rescue once again !!!
-
Vaanth replied to the thread 3" Backing Plates.The rear brake support, or backing plate, for 11"x3" rear drum brakes were the same on the C-bodies and the D-body (Imperial) for each...
-
Vaanth replied to the thread Odd 440 Block.The pictured engine is a 1977 440 truck engine built at the Trenton Engine Plant, in Trenton Michigan, on October 1, 1976 during the...
-
-
Vaanth replied to the thread Nox speed control unit Necessary for a 1972 Polara.If the pictured speed switch for the NOx (oxides of nitrogen) control system is removed, or left disconnected, the switch signal to the...
-
-
Vaanth replied to the thread Drumbrake question (1969 Chrysler).If you mean the part circled in the following image, ... ... Yes, it is actually this part of the parking brake cable:
-
-
Vaanth replied to the thread Drumbrake question (1969 Chrysler).The pictured new installation is arranged correctly. However, the return spring for the adjustment lever, green in the picture, is not...
-
-
Vaanth replied to the thread Discover engine model. Help!!.Yes, reverse rotation big blocks were available for the counter rotating half of twin engine installations.
-
Vaanth replied to the thread Discover engine model. Help!!.I've seen lists containing the lone 1970 383 entry for this casting number. It is apparently an erroneous entry. The last block casting...
-
Vaanth replied to the thread Discover engine model. Help!!.Block casting number 2899830 is for a 361 industrial engine beginning in 1968 and used into the 1970s. Head casting number 2806887 was...
-
Vaanth replied to the thread Inlet, outlet hose on 73 dodge polara custom with 318.The pictured item is the temperature control valve that mounts on the cowl to sense ambient air temperature in the plenum, and opens at...
-
