Search results for query: *

This is my choise,,

Thanks Guys now I have a few options,, Dave

The oil is new, and it is a remote gauge not original. When driving it seems to work away at 20#s, The engine is not rebuilt and seems strong. I guess I will for now keep an eye on it. What would be an acceptable oil grade change to push pressure up a bit.. Thanks for the input,,, Dave

Hello all, I have a question regarding my oil pump. When I first start my car (65 Polara with a 361ci auto) cold the oil pressure on the gauge is right at 40#s. After it warms up to180 degrees at an idle it drops to about 20#s, when I put it in gear it drops to about 12#Oil is clean and the car...

You are right John, my bad. I was thinking of oil light when I posted, go figure.. Thanks for your input... Dave

Thank you Dave,,,

I am installing an after market Amp gauge in my 65 Polara. On the back of the gauge there are 2 post left has (G) stamped beside it and right post has an (I) stamped beside it. Dose this indicate G to ground and I to hot wire when ignition is turned on. Also can I just leave the dash idiot lite...

Just checking to see what a pair of bucket and center councel complete would be worth 1965 one year only cable shift,,, Thanks

I think the best choice is the one that you like best,, Just sayin...

Thank you Dave, appreciated,, Dave Hunter

On my 65 Polara 383 I have an idiot light on the dash, that comes from back of block drivers side. A few inches toward the passenger side roughly same location on block is an Allen plug, Can I remove the plug and use a proper oil gauge and line to mount inside below the dash, My guess is yes so...

I,m surprised there are no phones where you are that would enable you to call the owner yourself. maybe just me but I like getting info first hand,, Just saying

This may seem like an odd question but, If I put a hot wire to one prong and a ground wire to the other prong on a seal beem it should turn on , If I,m in error please set me straight.I,m getting power at the head lights but no lights. on all 4 lights,, Scratching my head for sure,, Help...

Having some issue with headlights not working and wanted to remove te headlight switch so I can check it out and replace if need be. Problem is not sure how to remove the dash nob without breaking something. Is it screwed on or pressed on not sure. I could use some input. It is on my 1965 Dodge...

I was having similar problems and added the smallest (tiny) rubber band to hold it in place. It stayed flexible but kept thing where they needed to be,

Sounds good, I do have some room in the trans slot to close ,, Thanks

When the gas peddle is push down should the trans linkage begin to travel back at the same time or should there be a delay before it starts to move, when I kick it down when driving it does not seem to go far enough to engage the passing gear, info would be great,, Dave (Catfish65)

Thanks for the reply, and your right crime and that element seem to be prevalent everywhere. I,m getting up there and there are definite values from a by gone era that I miss not only the cars & Trucks, There always has been crime and drugs maybe not so extreme,,, Dave

Just checking to see if any members live in the Medicine Hat area of Alberta. Looking at a move to that city.. Catfish-65