Search results for query: *

- the red wire on alternator goes to the summit cut off - black wire on alternator goes to firewall junction ***tried putting the diode on the black wire but the car wouldn't start , so i removed it

Right. Maybe I'm dumb because I seem to keep forgetting the original context was the Dodge truck ammeters burning and not the car ammeters. In any case, your recommendations are great for cutting through all the misconceptions built up over the decades and I think the three points I summarised...

Wouldn't even necessarily have to be stainless, even a body color band might do. Absolute crazy thought --- illuminated plexiglass band. Like edge lit, or something. Is that even a thing? Just me and the cat home now. Sometimes the mind wanders into strange territory while otherwise unoccupied.

I've always used this.

these were beautiful cars! Thanks for the article.

Ditto. Converted 440 to non a c using their parts

Very nice vintage photo, I love it!

Very good suggestion, Jeff. Easy mistake to make. It seems "normal" to most folks to get everything back in place, with the arms hanging down, and tighten those shaft nuts. Even when you read the FSM it's not at all clear the reason for having full weight on the tires when you tighten 'em.

14v. Is the car running?

Ok so adjust it lower, wherever you want it.

Thanks for the tip. Did you covert your 4 flood lights for the instrument cluster to led? I think I just need to clean them up and new bulbs even original incandescents will brighten them up.

Adjusting torsion bars can be tricky. One side can affect the other more than you would think. It's always best to measure the length of the adjusting bolt protrusion before taking anything apart, so you can get everything back to where it was. If before you took the car apart, the driver...

All the brackets and pulleys are different between A/C and non-A/C. Get a complete matching set as trying to mix and match doesn't usually end well. Usually the P/S can swap over if you get the correct crank pulley, but the rest can't be re-used. Diameters and offsets are all different. Even the...

Same as yours- just the housing and the slots in the panel that let the light shine through. I found my old map light with a butchered harness on it and it didn't have a lens either, and the NOS map light I bought didn't have one. I useds these warm white LEDs in the dome light and map light...

No, it is not.

You should check your float level and the small bowls glued to bottom of the float bowl while it's open.

not to sound stupid, but could you explain this to me simpler. Like your talking to a five year old on ADHD meds

That's about a 1976 Royal Monaco with the St. Regis roof.

Is that wagon a New Yorker? Love that car. Now I'm going to look for a wagon!

Hi i am looking for 77 the 2 grille pieces. Above windshield chrome strip on top. Also looking for tan/yellow interior pieces. Thank you