Search results for query: *

Some memory is telling me that 1969-1971 c-body radios have a different curvature than 1972-1973 c-body radios. Is that true? @halifaxhops posted this chart on FABO. 1972 - 1973 pn are the same. 1971 is different 2580 766 MoPar 1968 Imperial Search tune AM PB radio 2580 786 418 Mark 1 MoPar...

Goal: 1970 Fury Convertible, replace the headlight switch without taking the dash apart. The headlight switch is held against the back of the plastic dash panel, instrument panel, with 2 screws which in my car go through the lower hole on each side of the headlight switch. Top Bottom My plan...

Backside, spades B1, B2, H, R factory marks Input Current B1 Upper vertical spade, L1 16BK, from junction with wire from Battery feed at FB, provides headlight power B2 Upper horizontal spade, L8 18P, power from taillamp fuse at FB, provides taillight and IC light panel power (2nd wire provided...

Is there any difference across Plymouth and Dodge 1971 to 1973 Electric Window Motor & Arms? Most interested in coupes. Thanks, Ben

My 1973 Dodge Monaco has factory electronic ignition, with 5 prong ECU and dual ballast resistor. At least from Rick Ehrenberg, the set up was available 1972 to 1979, so hope someone's got an answer. Problem: the engine has no ignition, no spark, when the key is turned to start and the engine...

I have a 1973 Dodge Monaco coupe, 360 V-8, 727 trans, 5 prong ECU with dual ballast resistor (IOW, ORIGINAL IGNITION SET UP). I have tried 2 different dual ballast resistors and replaced my original distributor with a rebuilt unit from Halifax hops. My problem is that when the engine is cold...

1973 Dodge Monaco factory radio question. Input voltage is 12.6V direct voltage Output voltage at left rear speaker is 31V to 0V alternating voltage. There is no direct voltage at speaker or fader. Does the radio have a transformer internally that converts DC input to AC output? I am a stereo...

· I believe my car came with the stereo tape with rear speaker. (Do not have tape deck) · Questions · Stereo control switch: what does it do and how does it operate? Is it really a thumb wheel fader? · Crossover (above glove compartment): what does it do and...

My windshield wipers don’t work. 1st I would like to test the 2 speed wiper motor and assure that it works. The motor is pictured below. I haven’t gotten into the wiring. I just want to know if the motor works. I read the factory shop manual and it seemed that testing in the car was done with...

I thought I read somewhere that Pertronix makes a Hall Effect Electronic Ignition Conversion kit for Mopar Distributors, but I can't find it on their website. I liked the idea because I like the simplicity of the system. See my 1990 Truck distributor below for an example Pickup: Shutter passes...

2001 Sebring, 62,000 miles. Evaporative emissions warning light came on in the dash. Codes are for small and large leak. Tried replacing gas cap, even with the new Mopar gas cap, but didn't help. Have 2001 Sebring factory shop manual. Read the section on the system involved, but it really...

@Davea Lux and I were p.m. talking about an aftermarket relay to replace our 40+-year-old OEM hidden headlight grill relays. This relay for Dodge Charger hidden headlights is on eBay. I took a look at topher’s feedback. It includes excellent feedback for the grill relay and is 100% positive...

My 1972 Fury III has an original type gear reduction Chrysler starter. In warmer weather, the car starts fairly quickly. There's no problem with the battery and the starter turns at the same rate the whole time. In colder weather, it takes several pedal pumps and several different turns of the...

· I need to buy a turn signal switch for my 1972 fury, non-tilt steering wheel, because the brown wire for the right side turn signals and brake light is not passing any voltage when I press the brake pedal or operate the turn signal lever. I wondered if this part number 3488805 is the...

My 1972 Fury headlight switch has at least one internal short, may be more. There are cheap headlight switches like this one on eBay. Or I can try to find someone to rebuild mine, although I may have a junk aftermarket switch already. I know with my 1970 panel dimmer switch, it was no question...

My 1970 Fury III Convertible has a Chrysler 2-Speed windshield wiper motor. When I turn the wiper switch off, the motor returns the wipers to lowest position in their wiping arc, but does not park them. According to the 1970 FSM, it is supposed to have a park cam that moves the wiper arms to...