Search results for query: *

1969 NY, front disc / rear drum. A while back, I replaced the rear brake hose which was restricted due to age. Not long after, one wheel cylinder started leaking, so I replaced them both (they were severely corroded on the inside). What was weird is that the lines bled, but they bled slowly...

Greetings. I have a Federal pump on my '69 NY (original 440 with only 60K) which is slowly crapping out. It's leaking slightly from the seal behind the pulley, and the shaft has some end play (very little, but you can hear it even with the belt still on). The leak is minor now, but I'm sure...

I have a question about the two-piece valve that is bolted to the power steering box in my 1969 New Yorker. It's leaking at the joint between the main valve and the additional piece that mounts on the front of it. I know that if you remove the entire valve from the steering box, you have to...

Has anybody retrofitted a master cylinder from a different application onto a C-body? I think I remember somebody using one from a later cargo van or similar vehicle. Mine works fine (it's an older re-manufactured unit that the car came with) and I don't intend to do anything with it soon...

Hello all. I asked this question a little over a year ago and wasn't able to get an answer, so I'm asking it again in the hopes of figuring this out. I have a 2000 Dodge van (5.9, rear wheel ABS) that has the ABS and BRAKE lights on. A hard stop caused the lights to come on about a year and...

Greetings, folks . I have a '69 NY that rolls straight down the road and doesn't wander, but the steering wheel is a bit off to the left. The car does not need a complete alignment, but I would like to center the steering wheel if I could. Is it possible to do this simply by moving one of the...