Search results for query: *

I feel kinda dumb for asking.....but gotta do it... Can anyone post a decent shot of how the splash shields go? Thanks, Kel

Anyone ever rebuild or reseal one? My 66 Fury pump leaks from shaft right behind pulley.

Well, I did it. Pulled the tranny to get all the leaks fixed, so decided it was time to pull the motor to do a frame on restoration. Seats should be done by end of the week, need to chose paint to do engine bay, then detail motor/tranny, re-install so I can drive it while I prep the rest of the...

trying to get off to clean terminal corrosion, before I go and break some clip or something, thought I'd seek advice for removing, thanks.

Do not know what this is for, is it a stock piece?

been chasing this ongoing electrical problem, after replacing starter, relay, lights issues, radio issues, finally nailed it down. Cleaned all the wires on the inside firewall, went to check the outside firewall, found corrosion, thought I "fixed" it, nope...then there it was, the connector that...

Ok, after 2 weeks of trying, the new shoes are on. This Mopar stuff is nothing like I've worked on before.... 2 weeks ago I order tires/wheels from Discount Tire, they show up...oops, lug pattern is wrong, we're sorry, will get new one's at end of the week... Wheels show up, get a call from...

The guy I bought this from told me I needed to get some window tape to this back together. Wondering what other option I have or where to get said window tape? put

Everytime I drive the car, I get small puddles of oil in shown areas. I wipe it off and comes back, since it's above the valve covers, coming from the bolts? I "snugged" the bolts a wee bit, but didn't help. Thought I'd ask for help before I start taking stuff apart....BTW, I did get the turn...

sorry fellas, I am one to Google my tail off before asking for help....my head is spinning looking, so here I am.... I have the Vin decoded, looking for help with body and engine codes. was told that this was a numbers matching car, would be nice, but not a deal breaker by any means...not...

are these rebuildable? I managed to find a decent one for passenger side, looking to repair or replace the drivers side without shelling out $150...if I can help it. One thing I have learned in the short time I've had this car...I thought someparts for my 68 Firebird were either hard to find or...

Dang, this thing us nothing like I have worked on before.... :icon_scratch: Looked at this from every angle...how to I get this open to remove/install the speaker?

Putting in new am/fm mp3 stereo. What are you guys/gals doing for speakers, particularly rear speakers and mounting locations? Kel

Ok, 3rd post, I scoured 10 pages of archives with no luck. I have low beams...most of the time, no high beams at all. Bought new dimmer switch, same problem. Put ohm meter on both switches, they both checked out ok. Did same on both high beam lights, ok there. Also, left turn signal works until...

looking under my new '66 Fury 318, I am going to need a drivers side motor mount soon. Having trouble finding one locally...anyone steer me in right direction pleae? thanks, Kel