Search results for query: *

Torqflite 727B transmission and matching convertor for sale. 1966 model with the matching convertor. Would fit later models with a minor change of the neutral safety switch and valve body gear selector lever. Will also fit some years Imperial models using the bolt-on output shaft yolk. Trans...

Selling a B727 transmission with convertor, originally in an Imperial but will work in other applications. Fully rebuilt 100% stock, and includes a rebuilt convertor (from past history - I didn’t replace it). This is the early 19 spline input shaft transmissions so it will not work with...

Selling a B727 transmission with convertor, originally in an Imperial but will work in other applications. Fully rebuilt 100% stock, and includes a rebuilt convertor (from past history - I didn’t replace it). Was installed and runs and drives fine. No warranty. Asking $1000. Located in Columbia...

Bought these when they said it was correct for my Imperial… they weren’t. My loss is your gain. New sells for $158 plus tax and shipping. Asking $100 plus shipping. Shipping calculated from USPS or FED EX website. Paypal or cash only. No cash apps. Located in Columbia CT 06237.

Selling my ‘66 Imperial radiator. Is in great shape and worked fine when last installed. A few bent fins and corrosion visible in tubes but did not seem to effect efficiency. Located in Columbia CT, 06237. Will not ship but might meet part way depending. Asking $400.00.

Torqflite 727B transmission and matching convertor for sale. 1966 model, will fit '65-'69 as-is when used with the matching convertor. Would fit later models with a minor change of the neutral safety switch and valve body gear selector lever. Will also fit '65-'66 Imperial models with the...

Was installed in an Imperial but will work in other applications. Fully rebuilt 100% stock, and includes a rebuilt convertor (from past history - I didn’t replace it). Was installed and runs drives fine. No warranty. Asking $1000. Located in Columbia CT, 06237. Will not ship but willing to meet...

Not sure if this fits other years or models but came from my ‘66 Imperial LeBaron. It turned on and would seek but no antenna do I don’t know if it works. Selling as restorable unit with the floor mounted seek button. In Columbia CT 06237. Asking $150 or make an offer. Shipping is additional and...

Pair of engine mounts with the factory hardware and heat shields. In great shape overall. Located in Columbia, CT 06237. Asking $500 or make an offer. Insured shipping is additional based on Fed Ex or USPS website pricing. PayPal, MO, or cash only. No cash apps.

Selling my used factory AC condenser from a '66 Lebaron. Includes the OEM receiver/drier, plus a new-in-box aftermarket receiver/drier and expansion valve. The low side tube that runs over the radiator support is currently there but will be cut to allow for a smaller shipping package unless...

Fits '64-'66 Imperials. Some pitting but no holes. Was blasted, primed, and painted as part of a restoration. Includes the lower support bracket and the battery hold down rod to the inner fender. Located in Columbia CT 06237. Asking $250 plus shipping (USPS or Fed Ex cost based off website and...

Set of restored rear control arms for '64-'66 Imperials. Might fit earlier based on the application for the bushings but I can't confirm that. Typically worn but never replaced. Includes all new bushings ($450/set new), all hardware, and alignment shims. Fairly heavy but will ship. Located in...

Selling a 1975 440 bare block. This is one I had started to work with for my own build but then was unable to continue. It’s std bore but will need to be cleaned again (surface rust) and boring. I have the two missing main bolts and note this block has provisions for the early C bodies too. Was...

Fresh rebuild that has been run so cam is broken in and it’s ready to install. .030 over six pack forged pistons, stock rods and crank. Fresh 452 casting heads with minor porting and clean up, guid liners, positive seals, new valves, etc. Internally balanced, Comp Cams valvetrain parts...

Freshly rebuilt 1977 440. The block seems to have been a warranty block as there are no stampings on the assembly pad or VIN pad. Guessing it was an RV engine. Block and heads suffered from what I'd call excessive rust but they have been cleaned and block run through airless shot to clean it out...

Bare block. Std bore with a "primative" hone job. I consider it a core block. Also have a cast crank and balancer for extra. Block - $400 Crank & balancer $50 I also can provide sonic testing or any amount of machining or assembly up to a complete dyno'd engine package, or any body or mechanical...

Disassembled bare block, std bore, with caps and bolts. Good platform for any stroker combo or I have the crank and rods seperate for a 400 build. Block - $400 Crank and rods - $50 I also can provide sonic testing or any amount of machining or assembly up to a complete dyno'd engine package, or...

Complete carb to oil pan. Turns by hand. Does not include accessory brackets or pulleys. Manifolds are B body. Engine is out of B body and was described to me as able to run although it's grungy inside. Currently the carb is stuck and needs a rebuild. $300 I also can provide any amount of...

C383 bare block. Was stripped, cleaned, and magged years ago but poorly stored. Has rust. Is std bore but will need to be bored and complete machining. $175.00 Located in eastern CT, 06237. Also have crank and rods in similar shape for extra $$.

All are in Eastern CT, 06237, town of Columbia. Pictures by request. Can ship world-wide for crating/shipping costs or can drive up to 200 miles for gas/cheeseburger money to meet you. '65 273 (9/4/64 casting) long block. Stuck fast - no oil pan, valve covers, or rockers included but does...