Search results for query: *

The hood on my 72 is difficult to lift and stay up. It was difficult to close so I lubed it up and it was fine last year except up by the windshield you had to push down on the hood about an inch or so just to get the close not hard pressure. Now it’s all out of whack when it goes up I’m...

Still stuck at home mostly on an on call basis at work since mid March. Ordering pm items for the Newport is my new pastime.

Just a reminder for any younger members here. Keep your eyes peeled on your local cable for action movie channels for some of the street action movies that were made in the early 1970s that are loaded with C body cars squads, limos you name it. The Jim Brown & Fred Williamson Slaughter/Hammer...

I was considering making a headliner replacement my off season project for this late fall/winter. I’ve seen decent ones for around $140. That’s fine, I’d just like to know what I’m getting myself into before I take the plunge. 72 4 door hard top if that make a difference or not. Reuse the bows...

anyone out there ever have the rear corners of there hood stay up an inch after closing it. It’s gotten worse & I have to make sure it’s lined up so my quarter panel doesn’t get the guillotined. I can push it down afterwards by hand but this is no way to go thru life.

never been, going this year. Looking for a few odds & ends for 69-73. Is it a good turn out for c’s there? Anyone ever go there. Have any tips.?

is it front valance, spoiler that resides below your front bumper that you inherit in a mangled state from a previous owner (probably a frozen snow bank) & has anyone had any luck straitening one out?

I’m new here & I know this has probably been discussed here more than the zapruder film but my thermoquad is epoxy repaired and running great but on borrowed time according to my recently found local carb Jedi master. I love the stock look & I guess it doesn’t hurt to have a spare. Or should I...

My 72 Newport has a noticeable list to one side. What could cause this? I had new leaf springs installed about 6 years ago but I did not notice it then. If I measure the top of each rear wheel well I’m almost 1 3/4 in off. Shocks torsions? Any ideas?