Search results for query: *

Join me in welcoming @tookie to FCBO.

RAYBESTOS BC92334 Element 3 Rockauto has it for $37.

Anyhing you try from internet / Chineseum sources will be very very wrong.... save yourself the aggravation..... My father - in - law has been making them for the planet for the last 50 years..... P.M. me , as per forum rules , if interested...... Craig.....

Sorry for the late reply…

I actually just looked at them last night and for how old they are (five years now?) - pretty good. Six are fine and two I need to replace. When I did do them I was a bit of a noob to 3D printing. I’ve got my own 3d printer and resin printer since then (I designed them and had some guy print...

There are several epoxies used for packing electrical/electronic devices now too. If I had some box start to lose it's old protective guck, I'd look into that.

@angus66 reviving this thread to ask angus, how are the 3D printed grommets holding up to the exhaust heat?

I am stuck trying to find a replacement front parking brake cable for my '68 300 Convertible. Right now I would even settle for a used one in good shape that I can adjust the nut on the end. I have new rear cables in place. The Raybestos product seems to be out of production and same with the...

That's to run a roller camshaft!

When in doubt have a machine shop measure and bush any over sized holes! A good machine shop won't charge too much to do this. By the way, any big block Mopar should have every lifter bore bushed to be effective. Just my opinion.

I have a C body block that had oversized lifters . Only on one cylinder. They ground a flat on valley at the 2 affected. I did not pay attention, as I was young and had already thrown away the cam and lifters. Put a purple shaft in, and those 2 lifters made a bit of noise, but never went flat...

I've been watching this one. Price has dropped from $8200 in about a week. Would be a cool car to make a fun driver out of for cheap.

I second this motion. Rick-O does sell a decent ECU. Got one for my '83 D150 /6.

That diamond is indeed indicating that you need to measure them, as they may not all be done that way..... if it's only a couple, that would certainly cut down on the cost of the bushing job.

Thanks a lot .I hope its gonna sound good i have two new 6x9 in the back also if there something i might do someting also in the kick panel . I have a lot more thing to do before two month

Your BEST bet for increased riding height would be to invest in SPRINGS which have been contrived to increase ride height. Springs n things (Leaf Springs For Your Car or Light Truck 1940-1990's+ ) among others can happily accommodate you in this. KYB isn't all THAT stiff, but their product...