Search results for query: *

I had a 1973 5-pin ECU go bad. Resulted in starting problems, cranking no start no spark. Problem was intermittent. Replaced ECU. Problem stopped.

Welcome

Welcome

Formal newport washer bottle nice $35+ shipping condition, over flow needs a good cleaning but unbroken $20, +shipping Battery tray no rust. $25+ shipping 2 very nice sun visors will be cleaned up before shipment $20+ shipping

I'd wager that the person from Australia you mentioned wanted the body/paint taken care of there because over here it costs a fortune. Not sure what the average cost to repair rust, prepare the body for paint and painting the car would be in the US, but to engage a competent company or...

Check these out! $3.29 ea., reasonable shipping. New Mopar 1966-74 Spark Plug Wire Insulator 273 Big Block Hemi | eBay Gave $21 for 4 of them. Thx All for queuing me upon this. My old '66 valve covers have a couple places for these.

Very helpful. I think I used one of your guides while I had a TQ-equipped car. One important item that I learned while constantly tending to my TQ, was that the leather accelerator cups are the only ones that work with E-10 gasoline. The rubber cups (or whatever compound they are made from -...

Dad named my '71 "Troop car" so that's what I go with.

Hmm .... should be familiar, but it aint. about 2011. 1964. How about back then? "1313 Mockingbird Lane"

Made 2 panels to connect the Corvette inner door structure to the hem at the rear of the Coronet door skin. Went pretty well til my angle grinder went tits up.

Yes I'm running an impco system but cobbled together myself. I'm using a polish GZWM 90 L tank (360mm diameter, 986mm long), net volume is 75L. And using tomasetto at02 extra multivalve with 8mm connection. The trunk looks big but it was very hard to fit a big tank. With a lot of struggling...

Thank you @Joeychgo

Just show him these pictures. It might actually bolt together, but the geometry won't be right.

should be fixed now

A b body guy say it would work I’ll show him this post to to prove my point

Pb :)

I have a complete setup from 1 of my parts cars. I am located in San Antonio Tx and can ship to a US based broker. Setup would include Manual pedal, firewall bracket, push rod.

Also see Some Tips For Rebuilding a Thermo-Quad Carburetor

Some Tips For Rebuilding a Thermo-Quad Carburetor Notes: This is not a rebuild procedure, but tips for the rebuild work. The tips are loosely in order of rebuild steps. The following assumes the carburetor is complete, off the vehicle, and still assembled. Carburetors with heavy corrosion or...

I woke up the '61 because the last 2 days were a pretty day so I took the '61 out yesterday and today to stretch its wheels I stopped at the mechanic who I take it to now to get an appointment to get my new porta walls on The next set of tires will be coming from Coker or Lucas I am going to...