Search results for query: *

Gents! I owed you pictures and I finally got them. You may believe it, even if it seemed unlikely. I taped my fon and a flashlight under the hood and focused on the connector/rod and went around the block a few times, taking it easy and flooring it. It ends up that my motor mounts are soft...

Hi, fury fan, The popoff (PO) is part throttle and is not during shift, but just under load, like off the stop sign, or super accelerating to pass. The tranny has a Transgo shift kit when I bought it 19 years ago. This issue just started happening about 6 months? I could not honestly tell...

All, I finally, finally, found a clue on this pop-off. There is/was no binding or misalignment while driving/in service. What I found was that after the tranny is warmed up, it doesn't pop. In the first 10 or 15 min of driving, it can pop. I dn't have a tranny fluid temp gauge. I do have a...

Good morning, fury fan. Yes. It is the same intake as yours. My bracket that holds the acc cable is stock for my car, with an additional ~1" raised base for the clamp (added/bolted a steel bracket). There is just enough thread on the KD rod (Mine does not have the short spring attach midway...

Gents, I did not forget your comments. I hope all is well. 1) The linkage is the 440 parts and looks like the original (?) blue-ish paint. Also, the top connector is the same 1 5/8" length. To the best of my English, I followed the FSM line by line. 2) I dropped the pan and replaced the...

Hello, SixPac, Very kind of you to take pics. I will do the same. I was going to ask/wonder if the same parts for 383 and 440. I think I can get access to the Parts Catalog. I saw it online (Allpar?). I have to admit as I get older, too, that I want to believe our babies will last forever...

Yes. 440 since inception in late '65, actually. The KD is what as far as I know/can detect with my eyes while looking at the FSM, the three piece with ball on top, spring clips on the bell crank to carb (with Edelbrock Mopar adapter, spring clip on bottom bell crank to ball at tranny lever...

Thank you, Travis. Yes, it was always a 440. But, I have seen other situations where we take for granted about what we have. So, I won't bet my paycheck that something isn't original as I thought. I am the 4th owner, but, really, the second to work on it, keeping it alive. The other two...

First off, always appreciate replies on this site. :) You might have a thought there on the roundness and grease I know it's not shiny ball round. Hmm. Also, I didn't think about the linkage not being long enough. I could actually lengthen it by turning it more counterclockwise to test...

Not sure where to start... '66 300 with a regular motorhome block, added headers and upgraded to Mopar's EI (blue box). She's less than 20K miles on rebuilt tranny with a shift kit. Runs great and peeps on both shifts when WOT. Except, lately, the adjustable middle rod (vertical) pops off the...

Hello, Big John, Did it work out?

Sir! I went to check on my '73 version disti and checked with brass feeler gauge, finding about .004" play (side to side) on the shaft. Thinking I had too wide a gap, I reduced it to what I *thought* was .008". Now(!) I know what that ticking sound is! Re-gapped at .010" and the tick was on...

Put one in myself just to save the battery at first, then as a backup to the mechanical that sort of pushes fuel most of the time... :) Separate, insulated fuel line from the back, added check valves so that each pump is not pushing the other! Good on ya to mention.

:lol:

I enjoyed just checking out your awesomely clean machine!

Welcome to Sept! Anyone, else, buy one? Have a good weekend.

:lol:

FYI, my '66 300 booster was replaced by Booster Steve (Booster Dewey Exchange at the time - BTW, I understand they both retired and the new outfit is in WA state?) with the mid-70s COP car Midland dual 9". He had to shorten the rod on the Midland Ross single that I used for exchange (was the...

Thank you, Boydsdodge.. E-Booger, eh? Ebayer still? I'll check.

Oh Master War Lock, Pray tell this minion the model number(s) of your cache? Thank you!