Search results for query: *

On my 67, 9 passenger car, the spare is in the passenger side quarter panel

Yummy!

Join me in welcoming @ryan klutt to FCBO.

Will do when I get home.

The machine shop onwers are a young guy and his "older" father. So he would have needed to lift it himself ;) And to be fair, I think this is a much saver way to do it. Can't slip off your hands. And your back will thank you :D

Yes, in this case the 0.055" was less! The other option would have been to sleeve the 2 worst cylinders and have them bore all the "good" cylinders just 0,020 over. But to do so, they would have needed to bore these 2 bad cylinders about 0.120" over (~3mm) to put the sleeves in. That would have...

Measure the hole in the light housing.

I was wondering if there were pistons in that size. Interesting.... This pic had me chuckling. A bare block hanging from a forklift. I don't think I ever saw a machine shop around here pick up a bare block like that. 1 or 2 guys for a 225lb Mopar, but small block Chevys were a one person...

Ah, ok. Less is more, and better!

Best I can measure across prong to prong is 1/2".

I have one, the other is broke apart, not usable.

There are also these. 5/8" size. Dash Tail Park Lens Lamp Light Bulb 5/8 Socket Wiring Harness Fits Chrysler C | eBay

Indeed! The block looks pretty nice, a little bit of dirt is left in the block, but hardly any rust. 4.375" (0.055" over) is going to be the final measurement. The Mahle PowerPak Pistons I'm gonna use are available for that measurement! The cylinders are not bored to that final measuremnt yet...

Do you have the sockets or are they missing? You can repair them. Rhode Island Wiring Service Inc. has the button, spring and insulator. Look under "supplies" then "contacts, buttons, springs".

I may start a Road to Carlisle Thread. I awakened the Imperial on Sunday and got it running with the new carburetor and a new ignition module.

What Big_John said. Also, a bad coil will give you the same symptoms as a bad carb / fuel issues. That piece of information saved my hide many times over the years.

Not sure what light you are referring to as I can not find a picture of a red/white/blue lamp on a 1868 300 Alan

In looking in Section 8 of the 1968 parts manual, seems that all of the front side maker lamps have a sort of metal housing the bulbs click into and the external pieces screw into a metal bracket of sorts. With a connector similar to what is pictured, for the rear side marker lamps, but the...

I know the oversized exhaust is not most C body folks cup of tea. Definitely not for every car but it is nice once in a while to hear a good rumble from a big boat.

'68 Chrysler & Imperial side markers were square.