Search results for query: *

Last bump. Will have at Carlisle also P206-7

Last bump. Will have at Chrysler Carlisle also P206-7

Last bump. Will have at Chrysler Carlisle also P206-7

Last bump. Will have at Chrysler Carlisle also P206-7

Also do not mix them at all. Everything has to be chemically cleaned or the rubber will swell alot!

Call John se what he has? He has been rebuilding them for a long time.

I think the impeller is recycled. Call Cowboy john. He is on the web he rebuilds them. https://cowboyjohnsautoparts.com/

Just a hair faster than the BD, Way slower than the MP springs. All in around 2600 mechanical

Bump

I have two NOS regulators for sale the one in the package is $110 the other is $100 and the ride. I tested both on my regulator tester. PN 3438150 dated 27/1

The 8 is the total it will add in distributor degrees. The rate is done but the spring and shims under the nipple. You need to switch them when you get the Vac advance.

What I have with 8, thats also a HEMI

All I need.

Big difference between 13K and 113K. Look around for stuff like brake peadal pad wear, and alos the steering wheel. Hoses and other rubber should be Mopar if it is 13K. Definately do a comp test if all are basically even must replace the rubber stuff, and do a tune up. Run from parts store...

OK Look at the installation instructions the choke idle and throttle will have adjustment screws.

Yes, that's it. I have the same one. I can pull it out and get the number stamped on it. It's barely pulling and quickly bleeds off the vacuum, so I can say with confidence the 60+ year old rubber is shot. Lol The Prestolite ones are not stamped numbers.

Now PA Valley stream for me wife Malvern. We did have a house in Patchogue for a while.

Just FYI will be doing Chrysler Prep all June till 3rd week in July. So if it is packed it is packed. Can bring whatever ignition parts to Chrysler Carlisle also.

Where in NY you from? Wife and I are from Loooonnng island

All big block are drying up. Electronic ones are out there occasionally up I think those "new" vac advances Tonys parts had made. Point and electronic. Big block DP are like I posted before.