Search results for query: *

Good Morning All I had mine re-vulcanized (if that is the name) buy Then and Now http://www.then-now-auto.com/nors-vulcanized-motor-mounts-rubber-products/ You will have to send yours in so it may take a while. So far so good although it has only been a year. Anyway, great company to deal...

If any of the other frost plugs show signs of corrosion, then the R&R of the motor is your best option. The rubber plugs are a temp fix. If one of the steel plugs failed, chances are the others are not far behind. Replace with brass. Not the end of the world, you can re-gasket the bottom end...

Good Afternoon Not hard IF you have the proper tools. The problem will be the ones that aren't accessible. ( back of block ). What shape is the cooling system in? If it is questionable, you might have to bite the bullet and pull the motor and replace them from there. Been there,done...

Good Day All Been a while since I have tuned in. I registered late last year, and have hotel reservations locked up. To add to the FCBO/FBBO/FABO conundrum, I registered the 'Party Barge' for 2025. Since then I have sold a couple of cars (66 GTO factory tri-power and the '68 SuperBee 6 pack...

Good Evening As long as it is a four wire switch for a non-tilt column the either style (barrel or slide resume) will work. The attaching point on the turn signal switch switch is key. It must be identical to a non cruise turn signal stalk. The mid 70's style (slide style) is probably the...

Good Afternoon Actually no. Just looking for a 70's style switch. Adding cruise on an 'A ' body that never available that I know of. Omni

Good Day All Looking for a cruise control turn signal switch for a non-tilt column. Only need the switch, but am open to other cruise related parts. Drop me a PM if you have one you want make go away. Merry Christmas Omni

Big_John Thanks for the info. The You Tube was especially helpful as it explained how to remove the upper housing. Although it showed a '64 column, the '65 looks identical in that aspect. Thanks Again Omni

Good Evening All Looking for a repair manual for a '65 tilt column.The FSM does not cover it (not that I could find). Thanks to all who respond. Omni

Dan Pretty Cool stuff. You have a gift. Omni & Mrs Omni

Good Day If the car is still around I would be interested in the electric trunk release (if equipped). Also, in case the previous mentions of cruise control parts fell through, I would interested in those also. Thanks for your time Omni

Good Day Does it happen to have the electric trunk release? Thanks for your time Omni

Good Day Interested in the cruise control setup if you are parting the car out. Omni

Dan Give Murray Park a shout. cbodies.com Omni

Try Lug Nut Guys Easy Shopping for Lug Nuts, Wheel Locks, Tires, Wheels | Lug Nut Guys Omni

Good Morning Ditto Scoopy G. Did the same thing to the '65 Newport (AKA Party Barge). I bought my cylinder from Craig (Mobile Parts) I opted to have the original booster (Kelsey Hayes) rebuilt, however, no rebuilds the KH booster. I sourced a Midland from Murray Park and had that one...

Overnighted in Michigan City. Arrived home Sunday about 12:30 via Turnpike. 360 miles in total. The Barge performed well (the oil light gremlin took the day off) but the brakes now seem to have lost the 'power' aspect. As this will probably be the last road trip of the Barge for 2024 I can...

Good Afternoon Not that familiar with the add-on units. I have a couple that are just to thick. What I do know is that with a console equipped car the unit has to be no larger than 5 inches thick as there is little room between the console and the bottom of the dash on a '67 A body. I do not...

Were you able to locate the A/C unit? Omni

Thank You Big John I just sent off an e-mail to see what they can do. Omni