Search results for query: *

This side-by-side pillar was indeed for the Imperial. The twin pillar for the Fury was one pillar in front of the other. Although in catalogs, I have never seen them on the cars. I reviewed some photos of Furies for sale today and they all had single pillar ones.

And have not found them, or a suitable substitute. They hold narrow trim strips outside of the windows on my 1965 Plymouth Fury III. They measure about 18mm long and 7mm wide. In the photo, you can see one intact, and another broken off with the peg inside the hole.

I had my 1965 Fury in the restoration shop for some work. While it was there, the reputable shop painted the valve covers and some sort of paint on the exhaust manifold before putting it back together After about a year of running it is peeling off in patches. I guess the only durable coating...

Thanks. The damaged one on my 1965 looks like the Match-mate. Guess that twin-pillared one not pictured on this page began to be offered in 1966. But I might go rogue and put it on my 1965. Never seen one that resembles the conical on any Mopar. Must not have been popular. Funny thing in one...

Thanks for this, although it is mainly about 66s. There are tons of mirrors repros available online market '66. What changed after 1965? One of the '66 single post mirrors look exactly like the one on my 1965 Fury. Sure don't want to have differing mirrors on either side!

I needed to replace the driver's side mirror on my 1965 Plymouth Fury III, and would like to add a passenger side mirror at the same time. 1. I see plenty of reproduction mirrors advertised for sale for A and B bodies, but none for C bodies. Do all body styles share the same outside mirrors...

The question is how easy are they to remove when we want to display the car in her full glory at a car show. I want something that is not too hard to remove.

I don't understand. I don't have a cell phone. How do I contact an address with @ in front of it?

BOTH problems occurred. No instrument lights, AND headlights turn on and then go off. I will check the dimmer switch, but I can't imagine that getting plugged and unplugged. And I am sure it has nothing to do with the dash lights. But thanks for the tips!

When I took my 1965 Plymouth Fury over to a mechanic's house last winter, everything worked more or less OK, except a rough idle. That was the thing I wanted worked on. The mechanic got busy doing other things, and the car was left sitting outside for about 9 months. When I picked it up, there...

Yeah, but it does not work, so I cannot locate it by sound. I can remove the ash tray. That will provide a portal up under the dash. Guess I will go with an electronic blinker. That way I can go with LEDs or incandescent bulbs.

Thanks. I will look there. With factory A/C there is so much junk under the dash it is hard to find things. Wanted to take the clock, radio, and heat/A/C control out for rebuilding, but I am not willing to tackle that. Do need the turn signal, however. How strange that in the factory manual it...

Don't think you understand. The new bulbs don't need an external flasher? How does the bulb know when you need the break light and when you need the bulb to flash for the turn signal? The problem is my current bulbs are good, but just do not flash because of a broken turn signal flasher. Think...

Thanks guys

These darn old V-8 engines (mine a 383) are always leaking oil. Most common place is out the valve covers. My valve cover gaskets were replaced not to long ago with cork gaskets. Do rubber gaskets seal appreciably better?

Doesn't show where it is in the shop manual. It is not in the same place as in my 1972 Newport. By the way, will those new electronic flasher modules work with both incandescent and LED bulbs? I would like to switch out to LED as the bulbs burn out.

I will pay you whatever you ask for one. I need a good one badly.

My 1965 Fury has this part cracked, as can be seen in the photo. It leaks fluid. My mechanic cannot seem to find a good one anywhere. It would be expensive for a machinest to fabricate such a part from new metal. Torqueflite transmissions were so common! Surely used ones should be available from...

Thanks! Where did you find this truck mat pictured? Grandma's Fury was always garaged, and only used for hair salon visits, flower arranging classes, and grocery shopping. Grandpa drove his 63 Chyrsler 300 everywhere else they went. Too bad my dad let the 300 go. But I kept the Fury garaged...

Believe it or not, I got the pristine original carpet in my Grandma's 65 Fury III. I would like to keep it that way. Only problem is the original floor mats have broken in pieces. Would be interested what cut-to-fit floor mats you all have found worthwhile. The old style front floor mats used...