Search results for query: *

  1. Finsinthemirror

    Dash Paint Type

    The 57-58 cars used a paint called "scotch grain" on the dash which was textured and had a flatter finish. I do not know if that was used on 59/60/61 cars.
  2. Finsinthemirror

    Machining work 516 heads port work/bigger valves/hardened seats??

    Well, I'm not sure $100 covers a good engine, I think those days are close to over. I think you'll need to be prepared to spend a little more on both an engine and consider shipping. It's just part of it, these are cars and maybe worse than that they're Mopars lol. You need to be looking for a...
  3. Finsinthemirror

    Machining work 516 heads port work/bigger valves/hardened seats??

    I guess I misunderstood your plan. My only point is that a 383 is a fantastic replacement, will be easier for parts sourcing, much easier with parts affordability, and more responsive to potential power upgrades. Additionally in your case you have wide range of years to choose from that will...
  4. Finsinthemirror

    Machining work 516 heads port work/bigger valves/hardened seats??

    I agree with finding a mid-late 60's factory 383 preferably a factory 4bbl motor as close to untouched virgin as possible. My car is also a small displacement early big block... so many more options for less cost with a 383 AND being a 64 you won't have to contend with the early crank being an...
  5. Finsinthemirror

    1960 Plymouth weather stripping vendors.

    There is good info and very knowledgeable people here http://www.forwardlook.net/forums/category-view.asp who would love to see your car and read the story, progress, etc. I believe Quirey Quality Design does weatherstripping.
  6. Finsinthemirror

    83/4" rear endcswap.

    That I did not know. Is that true? I thought for the tapered axle rear end you have to find an early sure grip pumpkin which is damn difficult and really limits what gear ratios you have available..?
  7. Finsinthemirror

    83/4" rear endcswap.

    He probably cares more about having the sure grip than the tapered axles. Nice 61! Ya gotta love that clear steering wheel and astra dome cluster!
  8. Finsinthemirror

    NOT MINE 1958 Plymouth Christine 2 Dr HT$5,500 · In stockListed in Florence, AZ

    I agree completely about the christine thing and quite likely paying to restore this car may have one upside down as is with most restorations, however I've seen exceptions with these sometimes reaching well into 6 figures - not that I'm saying to expect that. I know this pink car is a...
  9. Finsinthemirror

    NOT MINE 1958 Plymouth Christine 2 Dr HT$5,500 · In stockListed in Florence, AZ

    1958 Belvedere and 1958 Fury cars are among the most expensive and sought after of this vintage. Done right you shouldn't be upside down. I'd put this car together completely and correctly. Don't turn a top of the line car into a lesser Savoy, that doesn't make sense. All the missing aluminum...
  10. Finsinthemirror

    NOT MINE 1958 Plymouth Christine 2 Dr HT$5,500 · In stockListed in Florence, AZ

    Nah.. it's just as easy and probably less work keeping it all Mopar instead of grafting a modern-ish crown victoria taxi cab under the Plymouth body. Keeping it Mopar and original won't be murdering the entire potential value either like that dude is. Metal is very available for this car, its...
  11. Finsinthemirror

    NOT MINE 1958 Plymouth Christine 2 Dr HT$5,500 · In stockListed in Florence, AZ

    Restoring this car would not be impossible at all, what should make someone reconsider starting with this car is all the missing parts which all need a 58 Belvedere 2dr hardtop to replace. Those parts are nothing less than a nightmare to have to find and very expensive if you can. Additionally...
  12. Finsinthemirror

    60 413 engine 8 bolt flange no flex plate crank swap for 6 bolt flange 62 up crank

    Just so it's said because levels of experience vary, that transmission is one heavy awkward SOB, so if you are yanking that thing at home on your back, be careful! Work slow and sober, do not cut safety corners and be damn sure to have the correct jacks/stabilizers and help. It's much easier...
  13. Finsinthemirror

    60 413 engine 8 bolt flange no flex plate crank swap for 6 bolt flange 62 up crank

    That is a ton of work for some big uncertain if's. You should use the entire 62 drivetrain engine and transmission. Look into Imperial Services for advice on getting a custom transmission cable to do your swap. I wouldn't swap internal engine parts swaps without having a competent machine shop...
  14. Finsinthemirror

    Another V-Code ‘70 Fury Surfaced?

    That is a very cool car!
  15. Finsinthemirror

    NOT MINE 1961 Dodge Pioneer 2 Door Chopped $8,000 Listed 2 weeks ago in Rancho Cucamonga, CA

    eh.. I just don't see it as better but to each his own.. my head is an inch from the headliner as it is. I don't want to slouch or hunch over just to drive so mine will be kept the way it is and be just fine.
  16. Finsinthemirror

    We grow up, we get married, we have kids....poor guy

    The documentation I have with my Fury lists a 49 Plymouth sedan being traded in on a new '58 Fury at the time... they didn't all go from great to lesser...
  17. Finsinthemirror

    NOT MINE 1961 Dodge Pioneer 2 Door Chopped $8,000 Listed 2 weeks ago in Rancho Cucamonga, CA

    I like customs generally but I never understood people who try to chop the roof of a forwardlook era hardtop. I mean, one of the major things that Exner did was lower the roofline. Any lower just looks pancaked to me. That's too bad..
  18. Finsinthemirror

    For Sale N.O.S. 1958 Plymouth Fury Gold ( V ) Emblem

    The Fury has silver V, all the others were Gold.
  19. Finsinthemirror

    1959 Dodge Coronet - need a better 2 barrel carb

    It's kind of a pain in the *** but you might consider running a filter right before the fuel pump as well at least for awhile. Did you pull the fuel tank? There should be a slip on sock filter on the end of the sending unit pick up I think as early as 59.. It's plastic so if its very old it may...
Back
Top