Search results for query: *

Mesa in Escondido has always been good. They are old school.

Good morning I need a recipe for a 383 rebuild. I plan on keeping the crankshaft and stock bore but I need a list of all else to put it together. Aftermarket heads are ok. I was looking at the edelbrock top end kit. Bearings Rods Pistons Rings Heads Intake Carb Headers (that will fit) Ignition...

Detroit, Michigan, May 1935.

Hey thanks for that thorough reply.. I already have the interior trim panel off, along with the armrest, window cranks, etc.. what I am asking about, is then further taking the door apart, to access everything. My manual shows all the inner workings, as if interior shell is gone.. I’ll take...

Inner axle seals at rock auto. Yes pack the rear bearings in grease. Since the gear oil washed the grease out they need repacked now.

That is true for most folks, but in my case I react quickly to DL27 and L2B3. I took it as a serious request :)

I don't have any pictures currently but my 74 New Yorker has molded black trunk carpeting on the floor, sides along each quarter and rear tail panel with a matching carpeted tire cover.

Detroit, Michigan, July 1934 Appears to be a vacant lot now.

Check the Factory Service Manual about the need (or lack thereof) to pack the rear wheel bearings with grease before installation. Just a precaution. Some use the axle's gear lube for their lube as others might not. Enjoy! CBODY67

Unless the weatherstripping is failing, no need to remove it to do the slides, as I understand it. Yes, some white plastic clips to attach the w/strip to the door, but they are inserted into the weatherstrip (cut holes in the rubber into which the clips are inserted) and if you pull hard...

SMS is probably the only source but it will probably just be for the material and you'll have to have a interior shop sow it up. Get samples first. One suggestion is that a lot of us don't speak or think in "numbers". The VIN and interior code is cool and often helpful to post, but " '70...

@cuda hunter may be interested; @69CoronetRT

Thanks very much! Indeed a bit too far for me but I keep it in mind in case I can’t find a right shop in my neck of the woods. Thanks again!

This one is fake as well. Note the front fender emblem says "Super Sport". That is a 1967 emblem. For a 1970, it should either read SS396 or SS454 there. The lady has zombie eyes, and her hand wraps weirdly around his with the handshake; like extended fingers. We demand more accurate ai slop!

Back when I was looking for a spare cover for my '70 300, I came across those style covers being reproduced. For example, Legendary has them. 1962/1976 Chrysler Spare Tire Cover - 14"-15" Houndstooth - Legendary Auto Interiors They kind of piqued my interest at the time and I did a little...

Thanks for letting me join your group! I’m working on a couple of projects, the first is a 1966 Chrysler 300 all original and the second is a 1965 Chrysler New Yorker with a Cummins that I’ve had for 30 years.

I just messaged one of the administrators too.

Join me in welcoming @J15297 to FCBO.

Join me in welcoming @True Blue to FCBO.

No luck whit Murray Park. ☹️