Search results for query: wiring harness

...the ignition switch, and moved to join at the Start (S) terminal of the starter relay. On the 1977 C-bodies, the junction of the ignition START feed with the ignition START side of the ballast resistor was moved from the resistor terminal to the six-way disconnect in the engine wiring harness.

I removed this Auto pilot from a 1968 Chrysler 300 . It is untested . It comes with :the wiring harness , all linkages, dash bezel and switches and the speedometer cable to the speedometer. The Small white plastic clip that locks the cable into place behind the speedometer is broken but...

Good luck with the black coupling. If I were you, I'd DUPLICATE THE OLD HARNESS, WIRE BY WIRE, UPSIZING EVERYTHING AT LEAST BY ONE SIZE, which would mean by 2s. So, a #12 AWG should be a #10, a #16 AWG should be a #14 and so forth. Headlight conductors might be left at their #16 or maybe $14...

THIS IS EXCELLENT ADVICE!!! The time SAVED is WELL WORTH the paltry investment. Me, I like breaker points, as I can twiddle them into life and use old Uncle tony type hacks and voodoo on them. Breaker points make a rugged system. Still, I dig the performance I get from my /6 225 w the...

...fixed up this afternoon, with new points and condenser, fresh fluids and filters, LED lightbulbs in the dash, a repaired power-window wiring harness, a new power window lift relay, and a working passenger-side rear window motor (thanks to @70 Sport Suburban for finding one in his stash and...

By "4 wire" do you mean the dual ballast resistor 5 pin ECU and "3 wire" is for the 4 pin ECU? Most of the newer ECUs I've seen are 4 pins with a single ballast resistor. I even have read the 5th pin in some of the new replacements are dummies to keep people from returning them, but that...

Somehow I have to manipulate this rats nest into a serviceable wiring harness.

Not many to be found over here

I'd recognize those water works anywhere, popular high school drinking spot in the east end back in my day haha. Is this is the likely candidate wire? (Pictured red arrow) Seems to be the one, as it branches off from the rest of the harness. I will double check my wiring diagrams though, I have...

...surprise R48 doesn't work M45 did not come with the car P31 only drivers window works P41 door locks don't work J67 Trailer tow wiring harness / 7 wire Came in the trunk in a mopar bag Matching motor and trans as told from previous owner (not confirmed) Car appears to have never been apart.

Does the sniper fuel injection system not also come with an ignition module? There are coils that have internal resistors. And I guess it is common that aftermarket coils will come with an external ballast resistor if they need it. Some say that the ballast resistor is contained in harness...

The wiring on my 1973 Dodge Polara ex-Washington State Patrol car is a nightmare, and the car is currently not charging. I want to just start clean with a new harness, does anyone make one? Or do I need to find a nice used harness?

...wheel rolls, but no wear. The car has less than 80K on it. None of these problems existed before I removed the wiper motor and its wiring harness to address some rust holes. When I replaced the wiper motor and attendant wires, I had no horn, so I am going back to the wiring connections...

...Months went by. The next time I hooked the little trailer to the car, the trailer lights weren't working. I noticed that the wiring harness to the trailer plug had gotten pinched under a bolt in the hitch. I fixed that and the lights were fine again. And the power locks were working again...

66 Newport dash parts. Woodgrain pieces switchs, complete wiring harness. In good used condition. 125.00 Glovebox door with Woodgrain. 30.00 Fender turn signals. 50.00 for the complete set. 20.00 for the housings.

The alternator in my 1966 Imperial Convertible shorted and burned up the wiring harness. My mechanic says that he cannot locate a wiring harness for a '66 Imperial and proposes to remove the burned up one and recreate it (which will take an inordinate amount of time). I'd name my next child...

Unfortunately, like the others said there are no harnesses made specially for our C bodies. You maybe able to get a underhood harness from Evans. I bought a set of male and female connector from them so I could unplug my taillight harness and insert a harness so that I could light up my hitch...

Thank you for the replies I haven't had time to return to this due to weather and family obligations, but my next step will definitely be to jump power to the fan and see if it comes on. I also need to check power at the harness attachment points at the resistor so I can confirm power from...

The instrument cluster and dashboard wiring harness is sold.

I had a 68 Fury VIP.. Top is low beam. I recommend using a harness with relays to save your wiring and switches from burning out. Also get the headlights aligned for opptimum night vision.