Search results for query: *

A friend of mine is looking for a mint/very nice hubcap for his 65 Chrysler 300. Must be the type in the picture. Any leads and tips are appreciated. If someone has or know of a equally nice grille emblem he wants that too.

Our AC needs a recharge which means converting to R134A. Since we are planning to upgrade the car in most areas we have been thinking about maybe going for a complete kit with compressor like the one in the link: 65-69 Dodge/Plymouth Big Block A/C Upgrade Kit STAGE-1 Any experience with it...

For those of you who have C bodies with a bit more than stock power, what setup do you have? Did you beef up the stock 383 or 440, build a stroker or use an injection kit like Holly Sniper? The stock 383 2bbl will probably need a rebuild at some point down the road and I would do the trans to...

The Blonde Ambition has finally arrived and been with us for a week. We have driven it daily and have done some cleaning and tinkering like going thru the wiring - which needs some work - and set the timing, changed a few vacuum lines, replaced the ground straps etc. We are redoing the whole...

Can anyone tell me what these holes might be for? Only on this side, nothing on the right side of the car Could there have been a rubber seal like under the taillights..? I am considering getting a black stripe of foil or tape to get a black belt line across from taillight to taillight to...

What is the best way to clean up inside this drain box? Compressed air in one opening and a vacuum cleaner in the other? Maybe even spraying in some anti-corrosion fluid that will cover the bottom half of it and keep it from rusting? It's lived a dry life being a California car and now with...

Is this a pretty common option on a 67 Newport Custom? I wasn't aware it had this until we got the car.

Since we are redoing the interior we also want to upgrade all the old wiring etc while at it. I have been looking at complete kits like this from Painless: 21 Circuit Customizable 1966-76 Mopar Chassis Harness Part No 10127 Has anyone here any experience with this kit, or is there better...

So, the new wheels are on, disc brake conversion done, new mufflers and tips, all suspension done with NOS leaf springs etc. Now we gotta decide if we want to find an original antenna or plug the hole on the right fender with one of those chrome "buttons", and in that regard I wonder where I...

Since we need to do something to the seats anyways, and there are no reproductions to be found, we are considering having some made but with fabric like velour or similar, something comfy and nice compared to black vinyl in the summertime. Might even try and color match it to the exterior in...

Been looking at various disc brake conversion kits for our 67 and think I have narrowed it down to either Wilwood Pro Series or SSBC (which have lots of different kits). Does any of you guys have any experience with some of the kits in the links here? Mopar C-body front brake kit for stock...

Buying new blueline tires for the 15" Magnum 500 wheels and want to know what sizes can be safely chosen without risking any clearance problems. -Can 15x8 wheels be used in the front with say 235 tires? (Has 7x15 and 235 now) -With 15x8 in the rear, what size will fill out the wheel well best...

Does anyone know where I can get a mirror for the passenger door on a 67 Newport Custom?

So, still looking for another set of wheels to ship over to Norway with the car to have a different look from the Magnum 500s that's on it now. Have found a wheel we like but not sure about fitments. My buddy is concerned with the lack of space behind the fender skirts. They come in 15, 17, 18...

Is it possible to buy new seat covers etc for a 67 Newport Custom or 67 Monaco these days? Also where is the best place to get weather stripping for these cars? Thanks guys.

Found this one online and really liked the stance and overall look so I thought I would share it with you guys. Anyone else have pics of these cars with a bit more modern wheels, more musclecar look if you will? Would love to see some Chrysler Newport Custom Coupe '67 (1967) for sale

Consider selling our partially restored 67 Newport Custom 383/auto due to other projects. Have owned the car for 10 years and was planning a full resto and mild customizing, but things change and I'm gauging the interest. The car was absolutely rust free being from California since day one. The...

Consider selling our partially restored 67 Newport Custom 383/auto due to other projects. Have owned the car for 10 years and was planning a full resto and mild customizing, but things change and I'm gauging the interest. The car was absolutely rust free being from California since day one...

This is a super clean 1970 Fury Gran Coupe 383 2 bl California Car. It is a Former Good Guys and ISCA show car. It is a Fury Spring Special Package B, A98 on the fender tag. In FT8 Walnut Brown Metallic. It has the rare Walnut Brown Patterned vinyl top. Now has an Edelbrock cam, intake and carb...

Do you guys have any recommendations when it comes to suspension upgrades for our 67 Newport Custom? Everything from disc brake conversion kits to bushings and shocks/springs. It's not gonna be a pro touring build, but we want it to handle as good as we can for both everyday trips to the store...