Search results for query: *

It appears to be a one off?

The fresh air intake hose on the 68 Fury (non AC) is boogered. It’s the hose that attaches to the heater box and the passenger side area near the kick panel (odd shaped oval). Does anyone know what the part number is? And where it might be available?

Who has been to this? We’re going this summer. This year marks the 75th anniversary of the Royal Tattoo. Explore The Line-Up

Happy 427 day. While it’s not a Mopar, it’s very neat engine and story: April 27th (4/27) is 427ci Day The Ford Cammer, a legendary overhead-cam 427 V8, was shrouded in myth and controversy. Despite NASCAR's Bill France rejecting the engine in the Spring of 1964, Ford developed it anyway...

What do I need to take apart to replace the passenger side front fender on a 68 Fury? It appears that I might be able to do this without removing the hood, door, and bumper (although I think that I will have to loosen the bumper a bit to get things in place. Any advice would be appreciated!

Does anyone know if the cigarette lighter for a 1968 Plymouth Fury is being reproduced? I would like to get one as an original. I don’t even know what it would look like. It plugs into the ash tray.

In cleaning up the plastic face of Elwood’s instrument cluster, I dropped it. Now the speedometer is reading oddly. Can I fix this or is there a source that can fix? The needle moves freely but seems to have a mind of its own as to where it stops.

I’m cleaning up the heater box from Elwood, my 68 Fury II 4 door sedan. It doesn’t have AC. Can I remove this piece? (The steel) It appears to be swedged onto the shaft that it pivots on.

I am in the middle of replacing the water pump in Elwood, a 68 Plymouth Fury II 4 door sedan and I am wondering about the hose that goes from the water pump to intake manifold at the base of the thermostat housing. Circled in the engine bay picture, below. I found Continental part number 63642...

I got the transmission back together in Elwood, my 68 Fury II 4 door and I can’t get the transmission into park. I can get it into all of the other gears. I suspect that I didn’t insert the parking rod properly. I have dumped about 6 quarts of transmission fluid in it. I thought that I got the...

Last night, we took Shamu, our 69 Plymouth Fury III vert with my wife’s two oldest grandchildren (12 and 8) to see ️ Twisters. Movie was exciting. Something we need to be aware of here in the Midwest… On the way home, the car ran great, except for an annoying rattle emanating from the rear. I...

1957 Plymouth plaza

I’m putting a transgo tf-2 shift kit in Elwood’s transmission and I have a question about adjusting the throttle pressure. The fsm calls for a tool - C-3763 to set the gap for the throttle kickdown valve when it is compressed. I found this link that states the tool is 0.625” wide. A-904...

It appears that the size of pictures that are allowed has changed to a smaller size. I haven’t seen any announcements regarding the new picture requirement, but it is smaller than before. I now have to take a screenshot and post the screenshot. Before, I could just post the picture that I took...

I’m preparing to fix the inner fender liner for Elwood, a 1968 Plymouth Fury II sedan. There’s a larger than I suspect hole in the one I removed. This is below the battery tray. Does anyone have a picture of a good fender liner that they can share?

Happy birthday, Mopar! (Yesterday) The Maxwell Chrysler Six debuted on this day in 1924, paving the way for Walter Chrysler to build a car company with his name on it. Learn more about the automakers origins in this automotive history lesson.

Today, my wife and I brought home Lucy, from a rescue. She’s wonderful, 3 years old and is for some reason, sticking with me. It may be because I always have a bunch of liver flavored treats in my pocket. She was hit by a car when she was 9 months old and had to have her left rear leg...

This is for a 1968 Plymouth Fury. Where do these splash shield pieces go? I got these from Detroit Muscle Technology and no instructions were provided. I looked for a diagram online with no joy. Additionally, where can I get these harness straps?

I got a set of cat whiskers and it appears that they are stapled in. has anyone tried this or have a tried method? 1968 Plymouth Fury II four door sedan.