Search results for query: *

Looks great! what size tires are those?

Nice, the exh manifold looking good too, what are you planning for exhaust system?

getting ready to part out my 69 Cougar. I hate to do it but it needs to be on a rotisserie and I'm not able to do all that. btw, be careful if you ever google image search for "69 cougar"

If its the "mechanical" type old school regulator.. Did the new regulator fail when it smoked? or does it still give you 14V? maybe it was simply burning off whatever residue on the current carrying conductors. if so the smoke will stop when the oil or whatever burns off. run it while watching...

Dumb question but what is the proper way to sell parts on here? thanks

A press would be best but a big hammer can work if nothing else. The holes have tiny splines and so do the studs. I f the splines are wiped out then the new studs will turn also.

Are you sure the temperature gauge is working and somewhat accurate? maybe it overheated and spit out some steam from the overflow? coolant level good?

that's what I was thinking too, love this chase scene;

to answer your question; no here's an old battery test for an old car, with the engine off, turn on your headlights and honk the horn, if it honks then there's enough battery current to crank the engine (and thus the no start is not the battery at that point. If the horn doesn't honk or weak...

https://grandrapids.craigslist.org/pts/d/lake-odessa-440-big-block-727-trans/7816189984.html 1977 70K MILES

I use a similar one like that red one. Harbor Freight sells Braun mfg. very strong magnet, best rechargeable I've used. They make a underhood led also, cord type.

that figures...GM... nothing but trouble with the GM stuff

The last time I flushed a transmission, just because it had a ton of miles, I lost reverse, slipping bad. Had no problems before the flush. Afterwards I asked around and heard the same thing from more than one source: You should not flush the fluid, reason because all the by products of all...

Those wheels / tires look great , what size are the tires and do you know the wheel offsets ? Ive got a 65 Polara project

Never been a fan of any type of hood scoop on these slab side c bodys... However,,, I really like the photo taken at grill level with the scoop, looks good!

This has been my summer project. The AZ body had a crumpled up pass side taillight, quarter. The MI car had a quarter with rusty rot at the bottom and wheel opening. I swapped the trunk lid because the other one wouldn't latch right, bent. I used the tail light and its' frame and the filler...

I've done this from underneath, the car the jackstands. Best way I found after trying several things; as mentioned multiple times in prior posts... propane torch with a small flame or safer choice heat gun. It doesn't take much heat if its smoking its too hot. Wave the heat across the area you...

that makes sense , also the rain can drop to the bottom of the box and drain

cool idea..., curious, is there an advantage to the box rather than routing a tube / tunnel directly to the opening in the rad support?