Search results for query: *

Does any body have a 1968 Newport specific wiring diagram. I am working on my wiring using a generic “68 Chrysler” wiring diagram. It seems to be correct but I am not sure as many wires are the wrong colours. I have searched online but can’t seem to find a specific diagram. I can buy them...

Here is a link to the wiring diagram I am working from. http://www.mymopar.com/downloads/1968/68ChryslerA.JPG

Sorry, but this is not a conventional circuit. Yes I can trace this circuit to ground in many locations but that doesn’t help. The following is how the original poster of this thread stated it. “I have a constant voltage at the Pink wire and the Yellow is nothing, no ground nor voltage when...

This circuit does not appear to use a conventional ground. It appears to be a circuit that sometimes grounds and sometimes feeds power to the circuit. It really has me stumped. Part of my problem debugging it is the fact that I have a generic “1968 Chrysler” wiring diagram. It appears to be...

The map light is in the center of the dash connected to a “map light” switch so it can be turned on with out the headlight circuit turned on. It is the only light in the front seat area. The two rear dome lights work as expected. It is a very odd circuit as the yellow wire appears to be the...

1968 Newport I too am very confused by this map light circuit as I can’t turn it off. I have been working to correct many years of bad wiring mods and have now arrived at the point where the map light bulb will not turn off unless I turn on the headlights. I can then dim it and togle the map...

Hey Guys, I need to rebuild the carb on my 68 Newport 383 but am not positive of what the carb is. I ordered the Hygrade kit 1565b but it came with NO rebuild instructions. I have been searching the web for rebuild instructions but all of the carbs are a little different than mine. There is no...

I did find it by finding the wire colors that it uses, it is midway down the column, visible under the dash. thanks

This may sound like a stupid question but does the backup light switch hook into the shifter assembly as I have no backup lights but don't have a clue as to where the switch would be and thought this was a logical location for it.

Thanks for the links, the service manual is awesome. The parts book is a bit of a nightmare to go through though online. I was not able to find these missing pieces but I bet if I had the book in my hand it would be easier to locate them. ha Thanks for the links. The Service Manual is awesome...

John, That is a great photo of the missing piece, at least now I know what I am looking for. Upon further investigation I found that another piece, the one that attaches to the steering column/shifter lever that moves this missing piece is broken so I will need to find a replacement for that...

My Newport "automatic" shift indicator will not operate and shows it is in the second gear position. I realize it is not connected to the column shift lever as I can sort of see the linkages and can move the indicator by its lever and can see the column lever moving as well. My problem is I...

Do i have to bleed my master after having the reservoir run dry. I damaged a brake line while working on the car and by the time I realized the puddle on the ground the reservoir was empty. Can i simply add fluid to the system and bleed the brakes or do I have to bleed the reservoir first. It is...

That is the answer I was hoping for, many thanks :)

Could I use DOT4 if it previously had DOT3 without bleading the entire system. I would rather use DOT4 if i can.

Do we have a consensus on DOT3 and not DOT4

Can anybody tell me if I should be using Dot3 or Dot4 for an original brake system.

I am in need of the rubber boot that seals dirt and water out of the pasenger compartment that fits around the gas pedal linkage for a 1960 Dodge Dart Pioneer. Anybody know where I can get a boot or a suggestion for a replacement or an alternate product I can use. I have tried many online...