Search results for query: *

Some good info on documentation, thanks. Also, on carb cleaner, I am sick. I used to dip aluminum parts and they could actually be cleaned. On this car, I got some name brand stuff, and it did NOTHING to clean my disassembled AFB. WTH is going on today.

I am not trying to restore....I took five years on an MGA frame off. My 66 fury is RoadKill, and I want to drive it. But, as an example of just how much is involved in a resto, my bucket seat is one. I pulled the seats for floor pan work and carpets. Sent just one seat base off for cushion...

thank you again

Thanks, I had tried Hamtramck but only found the 70 site....will look again. Also, since you seem to know the paint, what does the poly refer to in many of the colors.

So, for you smart guys, I do not see a link between the car exterior and interior color, and assume it is found on the build sheet..,,question? For my RoadKill project, I have tried a couple rattle can colors on my console, as I replace the carpet on the sides, and get it cleaned up. But...

As I said, amazing, and thanks.

I used the 3M 38315, which is the small tube. Evidently this stuff has been used in the auto world now for some time...early on for corvette, and now much more broadly. I really like it. The small tube allows you to remove the mixing nozzle and close it up for future use....need more nozzles...

Where in the world do you find this stuff?? I used to have to research on three networks all kinds of info on russian and chinese tanks....but I think that dealing with old cars is much more difficult. thanks for sharing.

Just for grins....on your car, do you know if there is a seam or joint between firewall and floors.....I cant find one on my fury.

thanks muchly

Well, I am not sure what you may mean about a better job than that.....yr a better man than I am gunga din.

The manual shows a cutaway of the most complicated mechanism I have run across, and was only used for about two years....a large device with a cover, that parks the blades when the motor backs up....great.

Two things about welding floor pan panels drive me nutz. First is how to weld to rusty metal. Second is how to get in there to cut accurately enough to match pan to left overs. Was hard enough for me to cut around my marks from pans, and allow about 3/4 overlap for glue. My bud just...

I have done just a few searches on this, found the 70 hamtramck pages, but need to find what paint code may have been used on my red interior 66 fury. Have not found a build sheet. Anyone have suggestion on red paint code used on things like the console in 66?? thanks

My front pan from C2C was small, only the lower front section in the pic. It fit OK, but mine had more rust mainly up on the firewall, where I had to add some small patches, as you can see. Also, I had to make the larger pan that comes back to the center of the seat. All in all, I am happy...

I have maybe seen them, but was wanting to make sure before pushing the button... thanks.

This 66 fury has a three speed wiper motor with a missing crank arm....interesting. But, as there are few out there and they are expensive, I wanted to ask about the correct one before trying to purchase. Does anyone have some info on the design of the arm, like the offset bend amount and the...

New pans glued in with the panel bond small tubes....work great. Rivets to pull down in place to seal. Last steps will be to clean up both top and bottom seams, prime and use eastwood seam sealer, then finish off with bedliner on bottom. So far, so good. I have a friend doing a galaxy, and...

I have been working on mine now for quite a while.....most videos seem to say that this is done in a day or two.....hmmm. I bought this car because there was not much rust, and esp in the frame members, including the subframes. The main problem on this one was in the driver pan. I ordered...

I began by leaving the stud in place and one of the other screws would not go in......and in my shanker means, I actually messed up the bolt nutsert threads on the inside. So, after a huge fight, I removed the stud. Then, I could see that the round lower section of the new box, was hitting the...