Search results for query: *

@FURYGT should have some. I got a NOS one from him at Carlisle and I believe he still had another NOS and a used one.

I have two 68 Fury front bumpers one from a parts car, and the other that came off my car; and will be at Carlisle. Both bumpers are driver quality bumpers. The problem is fitting one in my car for the trip. With two passengers, a pop up tent, luggage and coolers, I cant figure a way to fit a...

I used the dual voice coil type also that I got from retro sound. Nice fit to the factory holes for the front and rear. They make a standard and low profile versions. I got the low profile version to give me a little more clearance just in case. With a newer under dash radio, it has great sound.

Here is a post where i put up with some information on where to get materials and a dimensioned drawing that i made for mine. I may still have some of the raw marerial left over since i had to buy a 4x4 sheet. WANTED - Rear seat speaker screen

There is a set from a 67 on ebay at the moment. I think they may be the same. They look like the ones on my 68. FURY 3 SPORT REAR BUMPER BRACKETS 1967 PLYMOUTH | eBay

Here are my drawings that I cut the material to. The 1st is a 1/2 scale dimensioned drawing. The second should be a 1:1 if you want to print it to a standard 8 1/2 x 11 sheet of paper and use it as a template. You might just want to verify the dimensions in the event your printer scales things...

Here are the pictures of the one that I made. after I cut the metal, I sprayed it with Rust-oleum spray paint (Oil rubber bronze). The top section I used Rust-oleum Metallic Matte Nickel. I drilled out the original rivets and when reattached it, I used a clear epoxy to adhere it to the metal...

Sure, I just have to look what it cost me for the material. I am not looking to make anything on them, as long as I can cover what it cost me and to ship it. I will also look up the paint I used for the screen and the silver on the top piece. both came out very close to the original. I also...

I purchased a 4 x 4 sheet of a material that I got from one of the metal vendors that i deal with at work. It is stainless steel and much stronger than the original material. I painted it to be the exact color as the original, but a friend used it as is for is 68 Newport and it looked good as...

The only Chilton's manuals I have seen is for the 68 to 76 Fury. I have seen them on ebay and amazon for about $25. They also have a 68 to 76 Dodge full sized. There is also the General Chilton's manual that covers most domestic cars. I think they run early 60's through 66. Then 66 through mid...

In the process of converting my 68 Fury from manual to power drum brakes. Looking for the brake pedal assembly for an automatic car. I believe 65 to 68 are the same, but not 100 sure.