Search results for query: *

As that paint is so thick, I'd half consider getting the car media blasted. Any chemical paint stripper or mechanical strip mechanism (sander, bristle disc, etc), would take quite a long time and would be a ton of work. As always, if using a media blaster, find a reputable one so he/she...

Yep, that is correct. Strip everything down to bare metal before painting. I'd put nothing over that existing paint anywhere on the car as it's most likely going to crack elsewhere.

Yep, that's paint. And if sprayed on thick, it could be that thick. Looks like a lacquer paint.

That looks like the paint has cracked and peeled off.

As it looks like you lap welded, make sure you use the seam sealer underneath the car as well. You don't want water to get trapped in between the 2 pieces of metal (original floor and patch). Also, I'd probably lay down a few more welds in that center section (green circled area). If people...

Metro Plating Home Page

I got my front and rear bumpers straightened and rechromed locally for around $850 for both.

That is a good job for 14. I had no idea how to do any of this at 14. One thing I've learned is that I like to always grind down my welds. You never know when you're missed a spot or there's an air pocket in a weld that can let in moisture, etc. Especially on something like a floor where...

And even if you want the clamp in the same place, it's not too hard. Before cutting anything, just measure where it is at the moment. Since there's a "hole" on the top side of it, mark the spot 3" directly above (or however far away a nice clean piece of metal is) with a marker. Then, after...

My vinyl top thanks you. haha

Very nice. I just ordered some, so hopefully it'll do the trick. Also, sweet car. What color code is that?

Wow, that looks like some good stuff.

Yep, it's been washed. Whatever is on there isn't coming off that easily.

Thanks. I may give that a shot first seeing as I actually have some at my house.

?

OK, so I ordered my 303 to put on the top. However, I need to get it clean first. Despite it being a new top, it's already dirty (I can tell from the fact I left a towel on the roof for a while and now that segment is much whiter than the rest of the top, and this was in the garage). What do...

Got it. Just installed. Worked it well. Taped it down in place and then shut the trunk lid. Fits well and trunk shuts well. Thanks guys.

Thanks!

Juat wanted to make sure. The “open” part of the “V” goes outward towards the car body, correct? Also, just making sure it lays down on top of the raised channel portion (see pic 2). Third, it goes down in front of the tall section that is above the bumper, or does it stop/start on the sides...

Well, he said the parts diagrams or whatever for MOPAR, compared to other makes of cars, are terrible. So while he might have known, I don't think he had them exact. Regarding the 2 pics above, I don't think the one listed currently for the Fury is correct either. That area near the radiator...