Search results for query: *

Hello All, I want to replace the filler tube o-ring on a 904 in my Cordoba. Is there a secret to removing the transmission filler tube? I have removed the bolt that holds the support to the engine block and the tube will wiggle and twist but not come out. Thank you in advance.

You are correct. NAPA only sells the GM-sized seal remover. I can't find anyone that sells the Mopar sized tool at a reasonable price. Looks like there is one seller. A cool $69.95 on Amazon.

I hdon't need to change the filter and change the ATF, so I found a generic tool sold by NAPA & Etc. Will this work? It is relatively cheap $8.99. Thank you...

My differential has been leaking at the bottom between the cover and the housing. I took the cover off and i am now wondering what the best way to seal it is. I have a new gasket and RTV for differentials. Do I use the gasket and the RTV or just the RTV? Thanks, Tim

If you can find some "Magnum" heads you can install them on your LA block. The link below is to a list of necessary items (according to Jegs.) Good luck! JEGS Performance Products 514212: Magnum Cylinder Head Assembly 1992-2001 5.2L Magnum | JEGS

Thanks to all for your concern!!! Carb already dismounted. Bowl mostly empty, Hey, everyone needs a little excitment in their life now and then.

I'm putting a remanu'd Holley 2245 on my 1976. I can't get the rod/pin that goes through the throttle lever (onto which the cables/springs are attached) loose. I've tried putting both PB Blaster and the 50/50 ATF/ace on it. Is there a trick to getting it loose? Left handed threads? Does anyone...