Search results for query: *

Step up piston adjustment is an initial setting of 1.5 turns from fully seated. It is a very fine thread so be gental on finding bottom, I place my finger on the cross arm that connects the needles so I can feel when it bottoms. I lightly turn screw back and forth to confirm it is seated, then...

I lube, no hammer, lot O lube the washer under bolt head I use to torque on.

You should be using a high zinc classic car oil. Castrol GTX Classic. Lucas Hotrod/ Muscle car oil, Brad Penn/ Penn grade. Etc... https://www.castrol.com/en_us/united-states/home/motor-oil-and-fluids/engine-oils/motor-engine-oil-brands/castrol-gtx-brand/gtx-classic.html Hot Rod & Classic Car...

Your location of the cooler is asking for trouble, road debis, curb at the drive in, etc...

You should be using a high zinc classic car oil. Castrol GTX Classic. Lucas Hotrod/ Muscle car oil, Brad Penn/ Penn grade. Etc... https://www.castrol.com/en_us/united-states/home/motor-oil-and-fluids/engine-oils/motor-engine-oil-brands/castrol-gtx-brand/gtx-classic.html...

It's great for an easy pass when you don't have to hit the floor to get it to kick down for a little increase.

no external mods needed, just your stock kick down linkage properly adjusted.

What I like about the 72 -78 trans is the part throttle kick down. It can be added to earlier transmissions. https://www.forcbodiesonly.com/mopar-forum/threads/727-tf-3-2-part-throttle-kickdown.26511/page-2

If not doing a restoration or staying original, I go with AVSII.

Depending on your location, you could have your tank shipped to a US border town mail box and drive down to get it.

Is this happening with engine fully warmed up?

Sounds like fuel is boiling and the mist you see is fuel vaporized from the hot manifold. How is your engine temp? Your engine timing? If timing is retarded to much, (even factory specs is too much retard) It will cause the curb idle to be increased, this opens the carb primary flaps too much...

No, you do not need one. Is it a nice addition to add while engine is open? I would and I also have not. It was added to cars with spirited driving in there use, like police, HP package etc. The windage tray helps keep the oil from get caught up and whipped around by the crank, some lower the...

If you pull the fuel pump, make sure the push rod goes back in the same way you removed it. Is the new fuel pump working now, if not it might be pump push rod. Valve covers are notorious leakers. Now you have me thinking to pull my Engine, I have a pair of heads being rebuild now and was just...

Imperial with a Vanishing Point Challenger. Woo Hoo.

Ask for Sammy. Sammy is the yard man, good guy and helpful. https://nationalmoparts.com/

Mostly a parts car swap. I have done a few for customers B and E bodies, very rare to hear of a C body needing power steering.

55k on that pan, looks like it has dropped all it was going to. Thats pretty good looking.

Have you had that pan off before? If so how many miles since the pan was cleaned out? I have opened plenty worse transmission pans.

I'd clean and rebuild as long as the reuse parts are in spec.