Search results for query: *

I know this is an old thread but as far as the hard starting after getting up to temp and letting it sit for 10 min or so that piece sounds like a heat soak issue from the weiand intake. my 66 charger 318 poly that has a weiand intake with a edelbrock 650 4bbl with electronic ignition and new...

So I got the dizzy out of the poly today to send out to @halifaxhops for him to diagnose and rebuild. Upon further inspection out of the vehicle, when I spin the shaft and look down from the top it does seem a bit out of round and there is a little bit of slight play side to side. However when I...

Thanks for the input, I may try those out.

So the autolites are new. Those 2 plugs fouled once already so I cleaned them and reinstalled in the 2 same cylinders and they look like that now. Is the heat range a bit different on the ngks?

Aha! I see now, I know exactly where it is

Thanks a bunch!

Can't seem to open it with any of the apps I have

Ok, I was leaning toward an electronic unit. Could you possible send a picture or post one of the mechanical regulator?

Got it! Any brand you recommend?

Is that a brand?

Thanks Dave I really appreciate all your input on this issue and the many others you have commented on. I'll get a new dizzy and shaft and see where that puts me

I'll check wire to make sure they are in right order, pretty sure they are as I jave triple checked but it doesn't hurt to look again. Funny you mention the distributor shaft being bent, that's is a possibility as I took engine out to seal the cam plug that was leaking oil and when putting it...

I should have mentioned that the plug wires are new and the cap and rotor are as well, however I do have the original coil and distributor which I thought about changing out, just haven't got there yet.

Hey guys and gals hope all is well! It's about coming that time here in the northeast to put the ole girls away for the season. I have been chasing 2 plugs fouling #7 and #2 here for the last month or so, Autolite 85s. I've run compression test on all cylinders and they are all within what they...

Will do!

I still hear the tick I have isn't normal, it's only on one side andni did the old skool hearing trick with a wooden broom stick and the tick is coming from the number 7 cylinder, im wondering if one of those rocker arms whether intake or exhaust is worn. As I have mentioned I reused the...

I don't mind it at all! Thanks! I'm using Castrol gtx but I added the Lucas zddp stuff they make. I broke my cam in using Schneider cam break in oil Ill do an oil change and try a 20w-50 and see if I can find one with zddp in it instead of buying a bottle to add.

Yes I will deal with it as long as that's how it's suppose to sound, just wasn't sure as this was my first rebuild and really have no idea what a solid flat tappet is suppose to sound like, but now I know and it's awesome because not everyone runs them, it's all hydraulic or solid rollers...

Ok, this is my first go around with a solid flat tappet so I wasn't really sure on sounds as there really isn't any videos on the internet of solid flat tappets mostly solid rollers. I'm using 10w30 but I am open to any suggestions

New link is up and ill post it here