Search results for query: *

I’ve been refinishing the driveshaft including replacing the U joints in my ‘70 vert. In a box of parts I have, I came across two NOS u joints, one from NAPA the other from Precision. I have no idea what car these were intended for, but they did com from an old Chrysler mechanic. I measured...

Uncharted territory for me here, first time rebuilding a carb and I’m already stuck. The carb is the Carter AVS 4966S that was on the ‘69 440 motor. It appeared to be in decent shape, but I figured it was worth going through with a new kit. I watched a bunch of videos and searched the forum...

Ok, moment off truth will be happening next or so, provided my body stops breaking down, lol. First, what is the bare-minimum wiring that has to be in place to run the engine for cam break-in? Do I need the column hooked up if I use a remote starter? Could I just bypass the bulkhead...

So today I decided to start putting the engine back together. The machine shop installed new cam bearings and I got a Melling SPD-11 CS-327. It was the closest I could get to stock. I lubed everything with the cam lub. The install went well until the last inch. I used the bolt to turn the...

I pulled he tank out of the black car yesterday to begin the trunk replacement. The top has a small perforations from the rust, but the bottom and sides are solid. Anyone have a cold patch rust repair suggestion? I'm thinking POR 15 with a fiberglass mat patch. Any bettter products out...

Ok, so I pulled this from the vert back in March. It's out of a 1969 300, E 440, cast date February 1969, build date March 21 1969. It spins free, 906 heads, 350 hp, pretty standard stuff. But, it's a 1969 motor. Originally I was going to rebuild it, and get the 1970 valve covers and air...

I'll be pulling the 440 out of my 300 vert tomorrow, and realized the last time I did something like this was over 30 years ago, any advice would be appreciated. First, where is the best place to bolt up the chains from the hoist? Should I remove the carb, alternator, fan, etc, first? Should I...