Search results for query: *

Since I put my Fury for sale I thought I would take care of the only small issue I am aware of. I have 8 3/4 742 rear with 3.55 gears. I have been wanting to install 3.23 set, which I do have. I have been facing a gear noise usually when coasting to a stop, it could be heard at slower speeds and...

Hi folks, I started my 5.7 Hemi swap a while ago a I thought I would share the progress. I was given a 04 Durango truck engine that suffered from hydro lock. Rebuilt it with stock components and fired it up on the stand. I used stock wiring harness and ECM, as well as accelerator pedal and fuel...

Hi all, I have been working on my Fury for 1.5 years now. Yesterday I drove her on the street for the first time ever. What a great feeling! I was thinking maybe someone could advise on a couple of things. Hot start issue... The car sat 15 min and as you can see in the video - it did...

I have a rebuilt engine that has zero miles after rebuild and about 1 hour of run time. The motor has 9.5 static compression, Lunati cam with following specs Advertised Duration (Int/Exh): 268/276 Duration @ .050 (Int/Exh): 226/234 Gross Valve Lift (Int/Exh): .494/.513 LSA/ICL: 110/106 Regular...

Last night I started working on the 440 for my Fury. It is a 74 block. I took it apart about a year ago and now can not remember where does one pipe plug go. There are 4 short oil plugs (2 on the back and 2 on the front), 2 water drain plugs on the sides and this one... The thread size is the...

I know there are a few threads on this topic, but I could not find what is the length of the throttle cable for big block? The car is 68 Fury, 440 motor with Edelbrock performer intake and carb. Can someone measure please? Thanks

Hi all, I am doing a 318 to 440 engine swap. The motor came out of 74 New Yorker. Last night I was trying to check the engine/transmission fitment and ran into issues. The oil pan hits the stub frame on the front. I did change the motor mounts to these I took them off the 383 motor that came...