Search results for query: *

Apparently, I have the wrong oil pan on my car, the idler is hitting it apparently, I need part # 2268459 but these have no markings, any way to identify them? Thanks

Just pulled this 77 440 out of a RV. On the pass rear of the block, I noticed a coating that was cracking. I pulled on it, and it snapped. It's brittle but hard. I first thought JB weld fixing a soft plug, but there is no plug undernieth it, and no cracks noticed yet What the heck is it? It's...

65 413 w a newer edelbrock performer. Just parked after a 20 minute drive, flooded, had to floor to start, never did that before Came home, removed air cleaner, and could hear it boiling What's the biggest/best spacer I can get under there? I'm willing to go to a skinny air cleaner

1965 new yorker 413. I swapped last year's metal ff for a clear on. I barely can see fuel coming in, and filter is 1/4 full. New sending unit last year, and when disconnected, fuel flows well by gravity. Fuel pressure a hair under 7 Is this normal? Seems to run good, first clear I've used. Thanks

1989 jeep grand wagoneer w an AMC 360 I installed a rebuilt 2150 2 barrel carb. I've become fairly familiar with it, and fixed a few mistakes on the rebuid However, I have a bad bog on acceleration past 1/4 throttle. You slowly accelerate, and it doesn't bog Checking the accelerator pump, it...

1987 new yorker, 3 speed A413. Looks alot like a tourquflight inside Jammed up going into park one day. Found the TV shaft bound up, and messing with it caused the shift shaft to disengage from the actual shift valve Took it apart, freed the shaft, reconnected the saw tooth selector to the...

Working on a 89 grand wagoneer w/ a 360. The connection for the coil is odd, and in bad shape. I opted to replace it with a coil with traditional post on it I picked a 1979 Cordoba coil. I thought it would match the ignition system close enough On the coil it says "use external resister) I...

1989 grand Wagoner 5.9 Just got this in, thought I'd pick " the brain" before I dig in Issue: if you prime the carb, it will run all day, start fine etc It sits overnight, and no matter what you do or crank, won't prime the carb. Once you hit it with starting fluid, it will prime, and go...

1965 413. Got probably 100 miles on this NOS manifold, this white discoloration just happened. Running a stock edlebrock performer, haven't monkeied with jetting yet, am I rich/lean? What caused this?

This noise just popped up. I've ran the engine about a hour overall before this noise started. Lifter tick? Dissapears or camouflages above idle Motor sat 40 years, fresh rotella 10w40, good filter, good oil pressure I just added flush now waiting. What do you guys think it is?

Got a 65 New Yorker, had a cable shifted trans, and they have a different hook up for the Speedo cable than 66+ I know 67-68 camero cables can work to adapt a 65 to a 66+ trans, but I'd like to keep the cable. Anyone make a adaptor?

1965 New Yorker wagon, originally a 413 Supposed a 65 vintage 413 in there now Any idea why someone would make such a contraption? Should of fit, right?

On my new yorker wagon, new performer, electric choke. It idled at 1200 when installed. I began fine tuning. Brought timing to 10 btdc , and got her down to 8-900. My idle stop screw is backed all the way out. There's a little click when I try to pull it back to the stop, drops probably 50-70...

Got a mid 70s trans in my 65 newyorker. The original Speedo adaptor is built into the cable, so won't go on a 66 plus trans. Any adapters available?

1965 413, any old school ways to remove this dent it's pretty big. doesn't need to be perfect just needs to get the motor some oil. no real access inside through the drain plug, I was thinking maybe welding some bolts on the pan and pulling on those? I've never tried it tho.

my 65 New Yorker has this cable-style shifter on it, and the trans has the normal kickdown lever /shift position on it. I do not know the history of the engine and transmission, but I know the engine is not the actual original 413. What am I missing here? Is there a special tranny that works...