Search results for query: *

Going down the road steady-state…45…55 mph can feel engine is not smooth…it “bucks,” it’s a 62 318 poly…my 350 in my 58 DeSoto did this and I put in new condenser…fixed it. Tried it on this 318…didn’t work. Have also changed points and coil too. Still does it. Engine is not a smooth idler...

Have been trying for a long time now to fix the leaks in my transmission. It’s a 1964 727…in a 58 Plymouth. Replaced kickdown shaft seal already now the push button shift cable is leaking at the adjustment dial. Cable itself looks fine but there must be a seal between that adjustment dial and...

Why does my 68 Fury 383 dump gas after shutting down? The smell is obvious and it’s done it ever since I owned it which is eight years now. I have an aftermarket 4 barrel carb. on it now for…. started out with the stock Carter two barrel, dumped gas with original and it’s still dumping gas...

Hi Everyone, Just thought I’d post this to get some feedback/opinions. I have a 69 Dodge Polara 2 door hardtop with a 318, auto. trans. Ran rough when I bought it in 2020. Couldn’t straighten it out with tune up so did compression check. Sure enough #2 piston had very low compression and a few...

I had some help last fall removing heads off my 69 Polara 318. It was running very rough and had lots of loss of power. Anyways, #1 cylinder was very low on compression. Upon removal of pass. side head, one of #1 valves was visibly burnt. Sent both heads out to local machine shop and had them...

1964 318 and 727 Transmission in my 58 Plymouth Belvedere. I have had constant transmission fluid leaking issues. Changed out pan gasket and filter twice in 6 years of ownership. Sick of it…so this time I bought a thicker ribbed rubber pan seal for a 1990’s Dodge Ram…Recommended by a mechanic...

Reluctantly, I recently put a 4 barrel Holley on top of my 68 Fury III’s 383. The throat has a 5 3/8” opening. I really don’t like aftermarket air cleaners so I’ve been thinking...Would there be a period correct factory air cleaner that would properly fit on top? If so, I’d like to find/buy one...

I've tried to fix the poor idle on my 68 Fury III 383 auto. 2 barrel. Also has slight miss when I first start up. That seems to go away later as engine heats up. Car still accelerates well...goes like a raped ape when I stomp on it from stand still. I've checked all the plugs...cleaned and...

Photo above is of an old transmission filter (on right) that I just took out of my 68 Dodge Monaco 500 (383 2 barrel) and on the left is a clean/larger (transmission kit) filter that I had sitting on my shelf. The clean/larger filter is from a transmission kit that I bought for my 69-70 Fury...