Search results for query: *

It was time to check the condition of the plugs after 20,000 miles of driving and I think the Poly engine was pretty well tuned... The top plugs are from the left bank My buddy installed new plugs and tuned the carb to balance the banks evenly

hi members I have a weird issue here that started last summer After a brief rain storm I turned off the wipers and saw that the wipers refused to park It’s a variable speed wiper setup Looked in the FSM but there doesn’t have trouble shooting for this issue Wipers work fine otherwise

but I couldn't I checked out the wiring and found that the coil wire in the rag joint had broken I quickly mocked up a jumper wire and I'm tooting my own horn once again:thumbsup: I did a pretty good job if I do say so myself :lol:

ok the polar a has had the left front signal stop working --Right signals are good-- I have checked the bulb It's good Ground is good at the lamp Rear left bulb is lighting bright I can't get the fsm to download to any of my computing devices Can someone tell me what wire colours are coming...

I found a good inexpensive source for LED lighting . This was my first test order to see if they are what they claim to be.

ok, so I have managed to rework some ignition wires for my Poly but it is a patch job for now. The main stream auto parts places keep handing me 318LA wires which do not come close to even fitting the Poly. I tried 383 wire set but they are not even close at all as well... Who here has...

I'm Stumped... ok so I've been trying to wrestle this beast for the past month now. Changed ignition wiring, (with a used set because the Poly 318's seem to have an elusive wire length that no parts supplier has a clue on what to order for my engine) Changed the coil and this engine will not...

So I've been experiencing on and off driveability issues this past few weeks. I found this last night. i had thought to myself for the cost to get a Distributor cap and rotor as a just in case. I has asked to ignition wires too but the desk jockey got confused and didn't order them in for me. I...

I added the Sylvania ZEVO LED 1157 RED bulbs today and they are great! Remember if you do this to get the Red LED bulbs otherwise the lenses can look washed out.. I just have to replace the backup lights, front signal lights; courtesy lighting all around

As promised last week I am posting videos on rebuilding the body harness for the Polara the videos may be a bit out of order but get the point across. I have installed the harness but not quite completed just yet and will update this 1st post with more videos 1966 Polara Door Jam...

With my 66 Polara apparently the 4 way hazard lights were stock. I'll be darned if I can locate the switch... Can anyone post a picture of the sitch they have for a 66?

I reconstructed the under the hood wiring tonight. I used to do this professionally for close to 3 years back in the late 90's so it came pretty easy for me. It is still in spaghetti mode near the firewall bock. I am bypassing the amp gauge but will need to run a power wire into the car to...

Be forewarned, you will need sunglasses before looking at this photo of the freshly cleaned ignition wires I installed last night :D :socks::socks::socks::socks::socks:

Ok so I am getting ready to wire up the Alternator having added a 60amp unit. I am going to bypass the amp gauge but need to know what the correct length is for the 10g wiring. I've read a # of posts here but no one mentions the correct length. I know the gauge should be 14g's Any ideas?

Hi everyone, I found this upgrade article for the headlight circuit which applies to any older car & I know that I will be doing this to my Polara once I get to the point when I am reinstalling the headlights. I take no credit for this other than posting it here...

So as the adventures contunue for my Polara. I am slowly getting the items list completed. One of the fun things is the firewall connector block is melted in the typical charge wiring location. Not just the hot going to the amp gauge but the return line as well to the starter relay. the Hot...

Since buying my convertible last year, as you can guess I have been getting immersed seriously in the the dark world of the electrical issues that these c-bodies can suffer from :D So anyways, after finding some fun electrical things to fix on my car, I have seen the Dodge connectors for sale...

So I am waiting for parts to arrive and knew I had to dig into the dash sooner or later to fix a few interesting characteristics that the car has shown us since buying this last summer. 1- very dim dash lights in the evening 2 - the headlight dash lights rheostat cut out the moment you turn the...