Search results for query: *

My 69 FuryIII 's ignition lock cylinder is worn out and needs replacement. I see new ones on Rock Auto for $7.95 all the way up to 50 freeken dollars on other places. Would like a recommendation on a good quality replacement brand or place to buy online. Thanks

69 Fury no side lamps.This was an intermittent problem last year and this year its done and doesn't work at all. I turn on the left turn signal and nothing from the signal lamp on top of the fender or the front light in the bumper. The rear left is working and flashing. Right is all fine. When...

I find this interesting . Bought a Cardone dizzy for points and was happy the cam lobes were much better than the one I replaced. {2 lobes worn down} Was fine and last summer and this summer getting detonation. Part throttle and tip in on the throttle. WOT not so much so I rebuilt my Edelbrock...

I am assuming it is a noise filter for my AM radio. Does the connector go to the + or - on the coil? I am also assuming the base goes on the coil bracket? Thanks

Sorted out timing and vacuum advance with my points on my 440. She has never run better. It is now in the mid 80's and I am getting a bit of detonation at part throttle but not all the time. Dwell is 29. The base timing is at 12 to 13 * btdc. I am running a Edelbrock 1406 with stock jets and...

Found out my car was setup all wrong. Vacuum advance on manifold vacuum,,4 degrees base timing. In any case she has now a new ballast resistor ,condensor,points , a new 6 volt coil, wires and vacuum advance now on ported vacuum on the Edelbrock 1406. Base timing is now at 12 +. She has never run...

Tony's parts has a new line of reproduction vacuum advances on their website. Cant get any more info on the site yet. Tony's Parts - Mopar Parts NOS and Used Vacuum Advances 1962-69 Dual Point - $85 1970-71 Small Block Dual Point - $100 1970-71 Hemi and 70 440-6 Dual Point - $110 SB and BB...

I emailed Tonysparts.com . They said to contact them in a few months regarding vacuum canisters for distributors so I did. They hope to have them in stock sometime in August. I think this is great news.

My Fury hasn't been her self this spring so I got out the dwell,vac, and feeler gauges to check things out. Idle was low and not running smooth even after I raised the idle . Anyways got the aircleaner off and was going to install my vac gauge on the line to the dizzy. Just to be methodical I...

Found this and it looks interesting. Cost is abit steep and I will wait to see next year if it comes down in price or there are other entries to the market. 24 watts for each light so less than 100 watts for high beams. This is on a Mustang sight but one of the reviews was from a guy that owns a...

Hey guys. I need a new dizzy and I would like to stay with points on my 440. Two lobes are worn down and I figure I would get another. I know they are out there and some really cheap,,almost too cheap. Also I have heard the advance curves are very aggressive with some of these. I don't know if...

My new to me 69 FuryIII uses points. Sure I could go out and spend 100 to 600+ dollars and end up with a MSD outfit but are points so bad? I have heard people saying the Mopar electronic ignition kit with distributor can fail and you should carry an extra box with you etc. If my current...