Search results for query: *

69 Chrysler 300, re-installing the swivel bolt with car jacked up. Got about three quarters back in and blamo the bolt shoots back out. It stripped the threads from the bolt shaft. You can spin the threads like a washer on the shaft. Is 2525 087 still a good part # for the Chrysler/Dodge...

69 Chrysler 300. Trying to remove my torsion bars to install TTI headers. Service Manual says to Remove Upper Control Arm Rebound Bumper. Unfortunately the stud in it just spins with nut. MUST it come out to allow more droop? If so, it will need cut out. I have the lower anchor adjusting bolt...

69 Chrysler 300, Power Drum Brakes. Rectangle with bolt hole in the middle. I'm striking out trying to locate one. Any ideas? Thx

Looking for the Power Steering Hoses for a 69 Chrysler 300, mine is leaking here. Anyone making these?

As usual, I need some help. Trying to replace the steering box, everything is disconnected. Must I find/buy the proper Mopar tool to pull/remove the steering arm or is there another way with typical garage tools? Car is currently on the ground. Should car be lifted with front suspension unloaded...

Anyone know where to get a set of interior fender seals, p/n 2925339? Thx

69 Chrysler 300 with Power Steering. With the front wheel off of the ground, bearings, ball joints, tie rods, etc. all appear tight, no unwanted movement. With front wheels on the ground, engine off, steering wheel play goes from 11:00 - 1:00 before wheels will start to steer. With engine...

My 69 Chrysler 300 has these 15x6 wheels with 300 hubcaps, both of which are kind of beat up. K-1-9 5*16 60 (I understand the Kelsey codes except for the 60, what does that indicate, 6.00"?) 1. Will poverty caps fit this type wheel? (Are all 69-73 poverty caps the same size?) 2. This repro is...