Search results for query: *

I just finished my 4 wheel disc install and just adjusted the prop valve to the rear as good as I could. I started with it being about half way and then slowly gave the rears more pressure. So far it can really put your face in the dash when stepping on it! What a massive improvement over the...

What kind of master cylinder would I need for a disc setup front and rear? Will I need a residual pressure valve for the rear and a proportioning valve too? I have manual drums and will keep it manual just with discs all around. Got a very good deal where the rear brake was essentially free...

I have an odd thing here. I have a 68 fury iii with manual drums all around. I contacted wilwood in regards to their disc brakes and master cylinders and got a questionaire back asking to measure the pedal ratio. I did that roughly as good as I could in the car and get a ratio of 4.5:1 This...

Is there Anyone who's got access to those lower control arm bushings and could give me some measurements? I would need the ID of the inner hole for the pivot pin (or the od of the pivot pin that goes into the bushing. ID of the outer metal sleeve and leght of the bushing. Looking to have some...

How do I find out what the std ride height is and how do I measure the ride hight in the rear accurately? I am looking at leafsprings and can choose std lower/higher...I just have no clue what to choose so my car wont look all jacked up high in the back!? I would like to maintain where its at...

I am looking at their tubular control arms. They are about $350 in the raw and I am wondering if anyone has expierience with their parts? I have read mixed reviews about them but all of them were like 'i had a friend who had a friends whos this and that broke'. Anyone used them?

Does anyone have expierience with the double adjustable viking shocks? How would they compare to bilsteins or even the KYB? I am looking to replace my monroe airshocks in the back soon and want to get something that is a little more performance oriented. I have KYB gas adjust in the front...

I need to desperately get some new rubber on my fury. Ive been playing around with the idea of getting some new rims with it too... currently have 15" cop steel rims with the center hubcap. Looks good but I have a hard time finding rubber for it thats not bfg t/a. I'm thinking...should I go to...

Has anyone driven the Mickey thompson ET street SS tires on the road? I am looking to get something better than the BFG Radial TA...at least for the rear. I dont drive the car much and very limited in the rain... I currently have the BFG in 245/60r15 that are almost 10 years old and pretty much...

I am currently trying to find some bushing for the leaf spring hangers for my 68 Fury (the moog ones lasted 2 years and are already having tears in them). I want to replace them with something stiffer and I am browsing around on the Energy suspension website. Has anyone done this? I found a...

I just got two new Raybestos Drums delivered (982091r which... comes out as mitsubishi rotors lol) The invoice states what I ordered: Raybestos 1924R. They said for 2.75" brakes and when I measure the drum surface they measure 3". Is that correct or did Rockauto send me the wrong parts...once...

can someone tell me whats going on with this? Dont seem to notice when the powersteering is under pressure, the slop yes, the noise no.

I have noticed this a couple times by now, when I brake a little harder from above 40mph to slow down and make a turn, I get this "knock" in the steering wheel. It feels like its dependant upon the tire rotation. What it does is, it knocks the steeringwheel back and forth ever so slightly. My...

to get the shaft and rubber out of the bushing of the lower control arm and get a new firm feel urethane bushing with their new shaft back in when just sliding the control arm and torsion bar back and working on it "under the car"? getting the bushing in does not seem like a big issue (i got a...

I noticed this on my tires a while ago, anyone knows why part of the sidewall discolors like that? They are about 4 years old,all 4 do it, one on the rear i see some... "Cracking" already where the lighter and darker area meet. When they were new, after 3mo i had one tire replaced cause there...

Hey..soooo i just took my drums off to adjust the brakes and check them cause my parking brake wasn't really gripping anymore... I found that on the drivers side, everything is full of oil. And i could tell it came out of the axle. Not the surface where the gasket meets the backing plate but the...

Quick question, did the 1968 Fury III have a return spring for the brake pedal? If yes, can someone post a picture on where the spring is located?

Hi all. I have decided to sit down and figure out a way to get some better tighter connection and durability at the strut rod mounting point. I am not satisfied with the Moog bushings and am constructing something myself, utilizing 2 of the rear strut bushings. I will be posting here on how I...

What would you do if you could only do one? Tubular upper control arms with better bushing and more adjustment range, a sway bar (front or rear? I know both would be best), a new steering gearbox, heavy duty tie rod linkage? Let's just say we have $400 to throw at the suspension to improve...

Does anyone know what the Backspacing is for 15" Cop Wheels? And what maximum Rim/ Tire combination fits on the 68 Fury III? I am looking to probably put some different rims on in the near future because my cop wheels are not pretty anymore and I cant restore them in my Apartment. Anyone done...