Search results for query: *

Need a little guidance. I am putting front suspension back together and I am not sure what the orientation of the torsion bar adjuster should be for installing the torsion bars. The nut holding the lower control arm in is loose, suspension is hanging as low as it will without pulling down on it...

Does anyone here have any experience with strut rod bushings with no sleeves? I am restoring a 1966 300 and the strut rod bushings I got from Mobile Parts didn't come with sleeves. The directions refer to both with or without sleeves, but 3 of the rubbers are very sloppy on the bar and one is...

I'm struggling with the installation of new upper ball joints on my 66 Chrysler 300. I had a hard time getting them threaded in and when I finally did they got real loose in the hole just before they bottomed out. Real loose, you could wiggle it in the hole. When you keep turning it , it...

Is it normal for new shocks to have peeling paint on lower rubber bushings. For some reason I can't upload a photo. It says the file is too large. Never had the problem before.

Looking for recommendations on what shocks I should put on front and rear of my 66 300. Not towing anything.