Search results for query: *

Does anyone know what the stamped "39" in the upper right corner means?

I need a little help here guys. Got a felpro gasket set from rock auto and it came with 8 each, 3 different size valve seals. I need 16 valve seals. I took off 16 umbrella type seals that are bigger than the valve guides. The gasket set had 8 thick small seals, 8 about 1/2 tall but too small...

I tried to get seals for my 69 300 steering pump and they asked if it was Saginaw or federal. My FSM only says it's a 1.06 roller pump. Any idea?

Is there somewhere that list yearly statistics. For example how many gold cars, how many convertibles, how many ac? Etc?

Does anyone know where to get a right Axle end play adjuster? My axle was making noise and I changed all the bearings. I adjusted the right axle and the adjuster out almost all the way. Put the lock on it and 50 miles later the lock was bent and the adjuster had turned itself off. It appears the...

My 69 300axle flange is ground down on the axle side. Bearing went bad and I had at least 1.5" end play. How important is this flange in maintaining end play. This is the left, non adjustable side. Should I start looking for a replacement?

I got a kit for my 4 lb Carter. It has two approx 1/8 thick base gaskets and one approx 5/16 gasket. When I pulled the carb, the base gasket was about 1/16 thick. Is there any benefit to which gasket is used. I pulled the carb cause I couldn't get it leaner. My tail pipes smell like raw gas...

I need some thoughts. I have the sure grip 8 3/4, 2.76 rear. On the road I have a noise from the rear of car. Jacked up and running in low, I have no noise. I put a pipe on the diff and the axle bearing housing and it all sounds smooth with no clicks or roughness. I tried listening on turns...

Working on a vent window frame for a 69 300 convertible vent window frame. IT IS NOT SAME AS HARDTOPS. Have bought a couple that were claimed to be for verts but are not. First picture is is sports or sedans. 2nd picture is convertible. Pin that glass pivots on is broke.

Finally on the road again after 3 years in my garage and 20+ years in storage.

I have a beautiful set of original hubcaps for my 69 300 vert. After working on car for 2 years finally put or tried to put hubcaps on the car. Wheels appear to be original and I know caps are. Question is that my caps do not go on flush with rim? Is it normal for caps to be about 1/2 to 3/4...

Well sitting in my jump seat while working on dash and fell in back floor haha. Upholstery lady had fixed nothing. Just covered up old trash. Seat back is a piece of plywood with a bracket on both ends and covered in foam. Don't know how she got the cover on a pile of sawdust.

Pulled dash apart to fix a couple things and found these two boxes. After about 3 hours in wiring diagrams, parts list and eBay. I found the little silver box is the 8 track player crossover unit and the black box is for the headlight sentinel. Just in case it helps someone. 1969 300...

My fuel gauge won't go past half when I fill my 69 300. Hot and ground all test good. I pulled float and grounded it on tank and moved the float by hand and gauge read from empty to full as it should. Put it back in tank and it won't go past half when full. When gauge reads empty I can only...

Looking for pictures or parts of electric seat trim for 69 300 convertible. I have the seat backs with chrome trim and only one broken switch trim. I may can repair this one if I knew what it looked like.

Just got a Ford switch #C7MY-14A701-F that is the identical seat switch for my 69 Chrysler C body. Just changed the chrome housing.

Finally got car on road. Speedometer works but odometers don't. Is this an electrical issue or mechanical? I assumed they worked as speedometer registered.

I have a 69 300 convertible and trying to find out if the seat belt retractors had covers. I spent 3 hours in the FSM and the parts catalog but nothing was listed. While replacing the carpets, there were small pieces of a cardboard material on the belt guides but not enough to determine if...

Had transmission changed and replacement one rebuilt. Speedo no longer works. It did previously. Checked all cables and speedometer head with a drill. Cables good, gear and housing good. Cables turn head just fine. Install gear in trans and attach cables and Speedo don't work. Installed...

Finally got trans in, got turn switch in, ready for test drive, new headlight relay from 2 months ago appears shorted. Never a break haha. Doors come open when turning ignition on and some headlights are bright, some are dim. Dimmer works, light switch works but cant turn then off. Try to...