Search results for query: *

I need to rebuild my door hinges on the 70 Sport Fury, and my driver's side door lock is getting impossible to fit the key in and open, so might as well tackle that as well. What have people done? Just end up matching the door locks with the trunk lock? Open to suggestions here.

Do these C-clips go on the inner side post of the 70 SF headlight doors? Do they go before those V clips or after? Also any tips how to get them on, if so? I can’t get them on for the life of me. Thanks.

Whats your thoughts: Front bumper assembly (I’m installing it will the the grille, etc) on before installing the fender wells for easy of access to bolts or doesn’t it matter? Looking for a quick opinion. Thanks.

im holding my passenger door channel weatherstrip. Which direction should it go? Does the sharp cut end start towards the front of the car and then the ridge on the back goes over the front of the channel lip? Or does the odd shape end go first and the ridge in the back goes over the rear...

I have the assembly manual, but does anyone have a good image of the quarter window mechanism and how is looks installed? Or at least a good idea of how it goes back together. My pre-disassembly window pictures are missing and I'm drawing a blank. I'll have to say, for how small the quarter...

OK, this is my fourth time trying to post this. Let's see if it works today. So, I'm having a difficulties with my body molding clips for my 70 SF. Once I put the clip in the hole, you have to put the center pin in it so the clip stays in place. Otherwise, if you install the molding on the...

So after procuring a 70 Sport Fury trunk medallion, I have learned they are actually 2 pieces. The body is chromed pot metal. The "insert" is actually aluminum. They need to be glued together. What do you suggest I use? I don't want it popping off while I'm driving.

Anyone know where to get correct silver wiper blades for a 70 SF? There were some ugly modern blades on there, and I have no intent on putting them back on the car.

A while back I recommended the 3m Scotch-Brite Bristle Disc to remove heavy rust off of sheet metal. I still stand by that one. Today I found a new product that works great for uneven and/or tight surfaces such as trunk channels and fender inner top (hood channel). After struggling during...

So has anyone restored a 70 SF grille before? Mine has some problems. The center section has 2 elongated pieces to which the headlight surrounds attach. Both side are cracked off and "attached" to the headlight surround section. The headlight surround section has a piece at the top that...

I'd like to get a tool to properly remove my antenna which is in nice condition. Can anyone recommend a place to buy the correct tool? Will this one work? Antenna Nut Tool socket Mopar Charger Cuda Dart Dodge Chrysler Plymouth duster | eBay or this one? Mopar Antenna Nut Tool Socket 68-74 A...

So, I recently contacted Doug (aka Steering Wheel Guy) regarding getting a rim blow wheel restored. It's in pretty bad shape. With the carbon fiber technique he uses, he can actually repair it and make it better than new. However, the price tag is $1300 for full-restoration including a new...

OK, I need a bit of help confirming a couple things/best technique to use on my 70 SF interior. Basically, I am restoring the entire interior. There were a ton of mice/rats living in there at some point and it is/was filthy. I have dismantled and cleaned, scraped, painted most of it. Last...

Does anyone have a pic of what the correct mounting nuts are for the 383 or 440 hood name plate on a 70 Sport Fury? It's part number 9420254. However no one seems to be selling them and I don't know what they look like. Thanks

Question: have any of you ever shipped a used fuel tank that, while drained, may still smell of gasoline? Any issues? Who did you use? Thanks

Wasn't even completely sure how to word this in the title. As many of you know, Mopar liked to use plenty of plastic-y parts for attaching their window regulators to the window. Also, most of you know these parts like to get super brittle over 40+ years time. So, my question is this: where...