Search results for query: *

This is a complete power seat base you bolt to the bottom of your bucket seat in place of the standard seat rails. The electric motors all work. It does need some cleanup and lubing to get it to operate properly. I have connected it to a battery and all motors work but the rear switch only...

Here is a blower motor, vent and wiring plus switch to suit a cbody, the motor runs fine and most everything you need to to fit this to your car. In the pictures, it is the first pic parts without the small vent with the larger vent showing in the second pic that will be in the package. I would...

These doors cards fit a 4 door hardtop and I am posting here for a prospective customer. I will let everyone know if he passes.

I have a pair of black seat backs here, each has a little work to be done to them, the pics are self explanatory and would only need a little repair done to each to make them good. I personally would reinforce the center bottom with some fiberglass over the split but what you do is up to you...

I have here a refurbished column used in floor shift cars, I pulled it apart and changed out all the obviously damaged parts and replaced them with good ones i had. I also cleaned the parts and repainted the outer housing and mount bracket, the turn signal lever also got the same treatment. The...

Here is the control unit in very good condition. The electrical ends show no melting or burns anywhere. I would like $45 plus shipping for the assembly.

Here are the covers for the interior pillar posts on a fusey convertible. There are no pieces broken out and no sun rot, simply need a clean. I would like $75 for the lot plus shipping, thank you.

Here is the jack out of the trunk of my car, it is complete and working but will need a clean up. $45 plus shipping for it, Thanks.

Here is a trunk release that came out of my Chrysler 300 but will fit other cars too. The system is complete with the hoses, button and even the "T" piece to fit into your existing vacuum line coming from your inlet manifold. Check the pics for details , the first pic is for reference of where...

This is the complete under dash wiring harness for the 1969 year cars, it may fit other Chryslers other than the 300 too. It is in very good condition and shows no signs of corrosion or melting. I would like $75 plus shipping, thank you.

This here is all you need to convert your car to electric windows, the assy came out of a 1969 Chrysler 300 convertible, but will fit any fusey convertible or coupe. Basically 1969 to 73. Imperials and NYBs though used different electrical switches. The wiring harness is complete and in good...

Here is an assortment of AC vent parts out of the dash of a 1970 Fury III and the vent piping too. I would like to sell the vent stuff as a complete package for $75 plus shipping. The instrument cluster assy I can split up, switches $15ea and the dash panels $40ea. The speedometer cluster will...

This is a complete power seat base you bolt to the bottom of your bucket seat in place of the standard seat rails. The electric motors all work. It does need some cleanup and lubing to get it to operate properly. I have connected it to a battery and all motors work but the rear switch only...

This is basically all you need to fit a rear defrost blower to your back parcel shelf. It fits in the passenger side rear speaker hole and the vent assy fits in and already prepressed slot in the middle of your rear tray. The switch is there too plus the almost all the wiring, the only piece you...

Here is a rear defrost motor and vent assy, it is the two speed type and I have the dash switch as well. I have checked the motor on a battery and it turns strongly blowing lots of air. I want $60 plus shipping for it. Thanks.

This is a new Tuff wheel (15in) that I purchased but I found a rimblow wheel and have decided to go with that instead. It is in new unused condition and I am including the horn button mechanism as well in the price, only thing missing is the mount screws for the mechanism. Check the pics for...

This adapter allows you to fit the ebody and bbody tuff wheel steering wheel to your Cbody car, these cost about $175 new and I am selling this one for $75 plus shipping.

Hey all, this is a brand new Tuff Wheel I bought but have decided to go another route. It is 15in in diameter so suits our cars well. I also have with it a second hand adapter for the Cbody column and i also have the horn contact assy that the horn button pad mounts to. Check the pics to see...

Here is a rear defrost motor and vent assy, it is the two speed type and I have the dash switch as well. I have checked the motor on a battery and it turns strongly blowing lots of air. I want $60 plus shipping for it. Thanks.

Here is a rear defrost motor and vent assy, it also has a heating element fitted as well. I don't have the dash switch though. I have checked the motor on a battery and it turns strongly blowing lots of air. I want $55 plus shipping for it. Thanks.