Search results for query: *

Hey all, I am looking for a SINGLE groove water pump pulley that has an absolute depth of 2 7/8in front to back. The diameter is not important. Check the pics for an idea, the first shows two I have that wont work, the second pic of what will work with the correct measurement, thanks!

Hey guys, I'm after an electronic wiring harness in good condition for my 73 fury sedan, it is different from most others as the firewall plug actually plugs into a black plug near the center of the firewall, check the pic for a reference and you will see a plug with a zip tie around it. If you...

Hi guys, Dales Chrysler 300 needs a couple of bits to complete it. He purchased a dual snorkel air cleaner awhile ago that is correct for a 1969 Cbody but the base is out of an earlier car that had an AFB Carter or similar. We are looking for the later wide mouth base that measures...

I would like ideally a full set of seats front and back for a 1970 Sport Fury, buckets in the front in white, all to be in very good condition or better. Or maybe someone knows of a parts car with a good white interior? I will also entertain a white interior from a 71 to 73 car with buckets as...

Yes, a strange request but I need the metal area surrounding the opening of the drivers side marker opening for a 70 Sport Fury, it is different from the Fury I, II, III. Check the pics for an idea. I only need about 1.2in out from the opening. Mine is of a Fury III converted to hold the light...

Before I do any work to Cbody Bob's trunk lid on his car, does anyone have one in good condition? Let me know, cheers.

HI all, I'm looking for an automatic choke for my 440 with a carter AVS carb. It doesn't have to be off a 440 though, as long as it looks like the one in the pic , that's the one I need. It's the lever on it that is important.

I am after 3 windshield trim clips like shown in the picture. These are the push on type, not screw it type. I looked on eBay but they sell them in packs of 25. I only need three maybe four. Can anyone help out?

Hey guys, I just need one of these, hit me up if you have one, thanks!

Hi all, I thought I would put some feelers out and see what is around. I am looking for a 1971 Sport Fury rear bumper bar with good chrome and no dents. What have you got? Let me know.

Eastwood Pro Brake Tubing Flaring Tool I am considering forking out for this beast, it is some heavy duty piece of work but it looks good. Anyone bought one of these before? http://www.eastwood.com/professional-brake-tubing-flaring-tool.html?reltype=3

I need a source for the rubber strapping used on the leaf spring packs. I can find it in the UK and Australia, but no sources online in the USA for this stuff. It is sold by the yard elsewhere, can anyone help and point me in the right direction? It measures 1 1/4in wide and 1/4in high.

I have been checking my parts bin for the 440 I am rebuilding here and I have come up short on some part, here is a photo of what I am looking for. It is a distributor drive as well as 13 sump pan bolts and thee pushrods for an RB, note that the pushrods have a step in the thickness of it at one...

Hi all, I had a corroded aluminum bolt that goes in the armature housing, it is about 4in long. Does anyone have one? Pain in the *** thing when you don't have spares.

I have a double flare tool kit here and I am missing the 3/16" flare die out of the kit, guess which one gets used the most? Anybody able to help with selling me one?

Hi all, I have taken out an ignition tumbler here because I don't have a key for it and the chrome end is a bit pitted too. I am looking for a replacement unit with a key in it. Check the picture to see what type, it has a flat shim running around the circumference towards the end of it that...

Someone said in a thread that they got interior parts from a demolition derby guy, maybe off a forum of theirs? I can't remember what thread it was. Does anyone know the forum in question?

Hi all, anyone got a new set of STD main bearings for an early 440 big block they wanna sell? Yes I know I can buy them new, I'm just wondering if anyone has a set cheap they have no use for before I fork out. :occasion14: