Search results for query: *

Hey guys: I am having an issue with my left vent window not wanting to close tightly to the seal. I don't want to crank the handle any harder than I am. It will physically close if I push it with my fingers but it will not stay there. There is probably a 1/4 inch gap. Is there a solution...

This goes in the power steering pump and is what the end of the pressure line seats against. When they get deformed you have a leak that no amount of tightening resolves. I tried removing it(the FSM has the procedure) and dressing it, but only slowed it down. Thanks.

Hey guys: I've had my '66 on the road for a year or so and have been working out some bugs along the way. I thought it might be both fun and informative to describe the issues I've had with MY car to see whether you guys have had the same things happen. 1. The worst, and still ongoing issue...

A year or so ago I bought a new gas tank and a new sending unit for a 1965-66 C-body for Van's Auto. I have purchased many items from Van's that worked well, so this is not a bash thread. However, I had problems with these two items, enough so that I would hold off on buying either until they...

So my '66 300 has a very rotten single exhaust from the muffler back. I want dual exhaust if I'm going to go to the trouble of locating another reputable exhaust guy(the old one retired). The reason I'll have to find a shop here to build a system is that buying any of the three known kits for...

Hey guys: Started to install the new gas tank in my '66 300 and found one j-bolt missing entirely and the other very, very frozen. I started looking around for a set, of which there are plenty. However, most say "68-76 , will fit '67 C-body non-wagon ONLY". What's the deal? The bolt I cut...

I thought I would give a heads-up about this. When I got my '66 300, there was a "new in the box" Wix air filter in the trunk. I noted the number, 42041, checked it online and it matched for a 1966 383 or 440. A few months later I was nearing the end of the engine restoration and dug that...

I meant to ask this earlier but forgot. AC car...2 heater core pipes near the center of the firewall, 2 AC lines right of that. What's the line in the bottom passenger corner that splits into 2? My '68 non-ac Plymouth doesn't have that. Thanks again.

Hey guys: I have the engine back in the '66 300 I rescued a couple months ago. Everything came to me in boxes, including the bracketry for the engine accessories. The FSM doesn't provide pictures of those items nor the belt routing, so if it isn't too much trouble could someone post up a...

Hey guys: I was in the market for a new project recently, and found this '66 300 sitting in the weeds way out in the country(via craigslist of course). I initially passed on the ad because I had found a 1965 Newport sedan that was already running and driving, but once I looked at the 300 it...