Search results for query: *

For only a couple years, mother mopar used this park device, at least I think this is it, from service manual. Mine is MIA. IF correct, they are expensive and my motor fries the fuses, so has issues and will need rebuild. My question is this. Has anyone tried to replace this 66-68 system...

I had to install a new wire harness in my RoadKill, as there were a couple large remnants of fire with the copper strands black and open, and many examples of use of home wire nutz, and a lot more. Some of this I blame on the old mopar plastic firewall connector that was bypassed. But, in my...

Would like to know what you think on coil resistance. Specs like to say about 11K resistance on secondary side. Just bought a new one from an ebay source....no idea where made, but only has about 8K resistance. Have not tried to hook up and look at spark....may have to. But, just thought...

Finally have come up with some videos on the subject that really help, esp on the operation of the gauges with the limiter. And, finally figured out how to tell which is in and out on these things thanks to previous smart guys. I have not found what folks think about the use of the...

So, who would think that the design and mfr of wire terminals would be difficult. And, have tried to get some from Amer Auto Wire, but got a bunch from amazon from our competitors. So, they look good, have a nice shrink tube on board, so used some for my new harness work. So the other day, I...

Cannot tell you about the pucker factor when installing a hew harness, with ignition switch, where OEM was having problems, and turn signal switch. The light switch seemed OK. So, remove the old harness, a mess, for sure. Then, lay out the new harness on the floor and try to negotiate what...

I have been working on my mechanical beasties for many decades. My first many years with crimping wire terminals was simple.....the standard thin plier with an oval shaped hole that just squeezes the terminal to flatten it into the oval shape. I gave it little thought, until the last ten or...

Have not yet really gotten into the wiper system. But, seems to me that the switch has power coming into the B pin, with one W pin maybe for the washer motor. And there are four switch wires to the motor. The diagram says all four just hit the motor. I want to test my motor. Anybody have...

So, I removed what appears to be a new, 55 year old, switch, my 66 fury headlight switch. And, with my pea brain, I thought I could just Ohm from the B1 power inlet, to the various outlet points. But no, not in my day. I get a connection to the H tab for the headlights, only, nothing else...

I have matched up the new wires to my old switch that still needs to be ohmed, but I find a purple or violet with a white trace, that is on a spade on the outside of the switch. I cannot find anything on the diagrams.....a ground?? Anyone know what this one is? Danka